Print

[JakeStriker2]

Sharpie00: what an awesome post.  This has to be the easiest f#$king mod I have ever done.  It was so nice not having to worry about the Do or the LPC points being in the proper position and all that garbage.

I did do mine a little bit different that I found to be easier.  Instead of using the 007 exploit with raincoat I got the 007 exploit with Evox in it.  I got the gamesave onto my memory card and put it on the virgin xbox HD.  Then I booted 007 and got to evox.  At that point I ftp'd into the xbox and put in a more recent bios than what came with the exploit (I could have done that before hand but forgot to) and made sure it was 1 meg cause I have a 1.0 xbox.  

Then I rebooted the xbox and followed the steps to get evox up again.  On the evox menu is flash bios. I selected that and then scrolled down to my appropriate bios and wham it flashed it!  I could probably do the whole thing in 30 minutes now that I know what I am doing.  And the best thing...it’s free!

Thanks again Sharpie00

[websurfer21]

I see that you have the tut for xbox v1.0, v1.1 and v1.2.  Is it the same for v1.3-v1.5?

[anjilslaire]

OK, I've read thru the whole 20 pages...
I'm using Morden's v3 exploit on my v1 box. I'm thinking about tsop flashing. Bottom Line:
Do I have to solder anything on the bottom of my mb? Do I need to remove it completely? Or can I get away with just the top of the mb? Not quite clear on this...

[Rush346]

Can you put the 007 savegame on an action replay card through USB with the action replay software?

[websurfer21]

for step 6. FTP into your modded XBOX and copy the ENTIRE UDATA folder from your TEMP folder to the E: Drive of the modded XBOX.


do I leave my NIC setting at obtain IP address automatically?

[CompMan86]

QUOTE (Rush346 @ Feb 14 2004, 06:35 AM)

Can you put the 007 savegame on an action replay card through USB with the action replay software?

Yes, that's the way I'm doing it. I still need to go rent an older version of 007 from blockbuster though. I read on the exploits forum that the newer action replays supposedly corrupt the hacked gamesaves...so I'm not 100% sure if this will all work. If it doesn't, I'll just have to go and buy a MS memory card and then return it (circuit city has no restocking fee, 30 days no questions asked. Just keep the receipt)

Rent one game, get another free from blockbuster:

http://fp.blockbuste...20620041626.pdf

[Gossamer]

It doesn't look like it's able to mount the drives properly. It's a V1.5 as far as I can tell.

If I take a look at the /media/E directory, it's empty!

Anyone have any ideas?


BusyBox v0.60.5-xbox (2003.02.17-17:02+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off

Get more Linux at http://xbox-linux.sf.net/.

# cd ../../media/E/UDATA/4541000d/000000000000/raincoat
cd: can't cd to ../../media/E/UDATA/4541000d/000000000000/raincoat

[ek247]

what do i need to change from the orginal tut to make it work with a v1.5 xbox.

i know i only need to solder 2 points on top of the board.
But can anyone tell me if i need to use a different xploit/bios.

cheers!

edit: sorted it out just need to overwrite the two raincoat files with the o.51

one question, shall i use evox m7 or evox d.6, and do i need to add anything to raincoat.conf

Edit: just done the mod, works perfect!!!!

used a evox d.6 and just followed the tut word to word. couldn't go wrong and it didn't.

cheers for a wonderful tut.

[stepcarr]

just to make sure of another way (if you already have the stuff)

[lordvader129]

QUOTE (ek247 @ Feb 24 2004, 04:06 AM)

used a evox d.6 and just followed the tut word to word. couldn't go wrong and it didn't.

either you didnt use d.6 or you dont have a 1.5, d.6 wont work on a 1.5 (looks liek you lucked out)

QUOTE

just to make sure of another way (if i already have the stuff) can i connect the 3 (i have a v1.5) sets of points on the MB, then use action replay to put game save hack on the harddrive of the xbox, put in 007 load the game then ftp in the need ed files and flash the chip there iknow this may not be what your tutorial was ablout but this will work right

you only need 2 sets of points on top, not all three



and yes, AR will work to transfer the save, make sure you use evox m7 or x2 4879 or 4981 as the bios

[wireless g]

[slayerstick]

   

[Spikey]

QUOTE

If you don't want to use the linux bios, use XBTool to make a 1MB image of the Xecuter 4976.02 bios and rename it to bios.bin.

I recently purchased my new xbox so I am assuming its 1.5

What bios do I use? The one that came with 007savewithraincoat.zip (bios.bin (1024k) ) ? Or which one of these that came with 007_With_Evox_Installer_PLUS.rar (EvoxM7_256k, EvoxM7_ef_256k, X2_4977_256k, xecuter2_4978.3_xboxMulti_512k) ? Or do I have to download a different one ?

Also after I flash the thing like in step 22-24, am I really all done ? How do I now play games that I burned or ftp to it ? Is the xbox ready to go all moded and nothing else left to install to it to give it full functionality or do I have to install some kind of new dashboard (or did we just do that by flashing it) ?

QUOTE

22. Then type: ./raincoat -p bios.bin to implement the new flash. 23. You will begin to see the TSOP being erased. It will then flash the TSOP and verify. 24. YOU ARE ALL DONE!

Sorry for the stupid n00b questions, thank you all for your help and patience.

Btw: I’m just trying to verify what I think, I’m thinking that i should use the EvoxM7_256k file that I spoke of because I read it many times in the forum but I am just checking if this is the exact one.  I was also thinking that I was completely done after I do this solder and flash trick please verify. Thanks


One more question, Can i use this instead of a memory card (then i dont need a modified xbox)? Thanks

[lordvader129]

you can use the evox M7 you have, or you can downlaod x2 4981


once you finish step 24 you can play any burned games or install any dashbaord you want to set up playing from HD, look to other tutorials for instructions on that

and yes, that CF converter will work, as long as it gets recognized as a mem card

[lordvader129]

EvoxM7_256k and EvoxM7_ef_256k are the same, except the _ef_ one will not reset when you push the eject button

4981 will block xbox Live to prevent accidental banning, it has IGR (in game reset) built in, to retsart the xbox by hitting a button combo on the controller, it also says Xecuter under the X instead of micro soft