Print

[WunSick]

i have a HE xbox, (clear green, halo edition) its a 1.4 i believe... Anyways... i soldered the two points on the top of the board so i can flash my TSOP.  My solder is virtually flawless it appears, yet, my screen is SLIGHTLY fuzzy, not alot just berely.... what could the problem be?


Also am i mistaken or do i have to connect two points on the bottom of the board for this specific version?


i have the rest of the materials all good, and xbox boots up fine.  Just lil fuzzy.





Help Me lol

[NICNAC]

two points on top will do it.

use raincoat and it will tell you if its good to go.

[NICNAC]

if using raincoat you will need to telnet in and issue the commands as stated in this thread.

you could try evox to do the flash but you may have a winbond, and these will not flash using evox.

raincoat is the safest way.

ensure you have the right bios, size and type.

if you are too worried about stuffing up try a softmod first.

[NICNAC]

you new need to look at the chip on the mobo of the xbox.

being a 1.4 version xbox as you say, you will need a 256k bios just use a evox m7 or m8

check this out for the correct bios
http://www.xbox-scen...ios_retail.html

and this
http://dwl.xbox-scen..._By_SLuSHIE.rar

[dokworm]

apporter, you probably didn't name the bios file you created "bios.bin" and it must be in lowercase (i.e. exactly how you type it) or you put bios.bin in the wrong folder.
Try an 'ls' command to see if it is there.

[caster420]

Does the directory contain a default.xbe?  List the files and directories that you have, you must be missing something.  Download it from xbins and you'll have the correct files.

Caster.

[nkysmile]

Yes, My friend everything include "default.xbe"  

I tried to conpared the original save game from AUF after you save and you will load back but the raincoat cannot see from AUF game at all.!!

If you have any ideal how can I find the right stuff for raincoat or I used the wrong version of AUF (Origial Platinum Hit)

Thank

NK

[nkysmile]

repeat !!! Sorry

[nkysmile]

Friend:

File I download is 007savewithraincoat.zip

included:   \udata\4541000d\titleMeta.xbx
                                         \000000000000\DEFAULT.XBE
                                                                \SaveMeta.xbx\
                                                                 \xbsavegame.dat
                                                                 \Boot\boot.cfg
                                                                          \kernel
                                                                           \ramdisk
                                                                  \raincoat\bios.bin
                                                                               \raincoat.conf
                                                                                \raincoat

there is the list of inside .zip

I can not load to AUF I don't know why

NK

[bullitt464]

what points am I supposed to connect on a 1.0 xbox?  it says 'top and bottom' pictures in your guide, but I only see one picture?  and I looked at another tutorial to see, and it shows different points.

[silentViper]

The first is of the top and second of the bottom

http://mywebpages.co...ie00/12-top.JPG

http://mywebpages.co...0/12-bottom.JPG

[prolifik71]

[ahootin]

I am confused in the tutorial it says nothing about an etc folder but when I use the telenet i get an error "unable to open /etc/raincoat.conf"  Then I get "Programming with bios.bin...unable to open file" I made an etc folder and put it in the raincoat folder and got the same error.

[Thacrudd]

^^^^^same problem!!!!

[jjjjlong]

  Thanks!