Topic: The Newbie Guide To 007 - Auf Tsop Flashing (Read 1775 times)

dustymac88 · « **Reply #315 on:** November 16, 2003, 12:01:00 AM »

OK..super N00b here...

NEED HELP FLASHING MY BIOS

I started modding my xbox with Mechassault font hack... renamed files and did the ernie and bert swap...and the evox dash would start everytime I would start it up without a disk. It was perfect for ftp'ing files and doing the trial and error routine..but I started getting confused with all the different tuts and nothing would ever show up in the evox menu folders such as FLASH BIO...it would also crash if I wanted to get into my MS DASHBOARD.
so...
I tried AUF and had no success with TSOP FLASH ...soldered the jumpers pretty well... heres where things went wrong... Instead of doing the memory card file switch from a modded xbox ..I decided to try and do a straight ftp of the AUF files into my xbox HD using the evox dashboard I installed with the mechassault font exploit...I put the files in the UDATA folder just like where the mechassault files were..
...when I try to load the game file for AUF ..it searches for a few secs and then says UNABLE TO LOAD FILE... so I'm all confused and have tried to reset all my XBOX C: drive files to original default.

heres what I've got...

XBOX V1.0
KERNEL 4034
TSOP - ST (Not sure what model ST Chip)
Access to MECHASSAULT & AUF (platinum)
1 MEMORY CARD W/ MECHASSAULT FONT EXPLOIT on it
SOLDERED BOTH JUMPERS
ACCESS to a modde xbox

..My next thought was to try the AUF memory card file swap from scratch..

..can anyone help me please??
...I am also confused as to where to put the bios.bin file when ftp'ing so I can FLASH...because nothing ever shows up in the FLASH BIOS option on evox.

Let me know if you need more info..or email me [email protected]

Thanks guys! (sorry for my ignorance)

tweaqr · « **Reply #316 on:** November 16, 2003, 02:40:00 AM »

how do you change the ip on the xbox for useing this method

Carrne · « **Reply #317 on:** November 16, 2003, 03:24:00 PM »

Hey guys i am having trouble using the auf raincoat on 1.0 xbox when i load the saved game it gets me to a weird screen sayin my xbox needs service and then some weird ass chinese language this is all on a black screen with green letters. not sure what happened need help please! oh yah and my light flashes different colors(green, REd).

dacke · « **Reply #318 on:** November 17, 2003, 12:59:00 AM »

QUOTE (IBNewBe @ Nov 7 2003, 07:25 PM)

Hi Guy...I have been following along with this 007 flash, and now I am trying to do one but ran into a problem.
After adding the 2 jumpers to the 1.0 MoBo then when I get to step 15, the screen does not go black and power light does not go orange.
I know I have missed something but I dont know what.

Any help is very appreciated....Thanks IBNewBe....

Same here... HELP!!!

*!UPDATE*

Got it workin!!! You cant have IGR enabled in Evo Dash when starting the Linux kit...

Carrne · « **Reply #319 on:** November 17, 2003, 07:24:00 AM »

any body know whats wrong

rickyief · « **Reply #320 on:** November 17, 2003, 04:10:00 PM »

what happen if I don't here the noises when load the savegame on 007? It' normal?

rickyief · « **Reply #321 on:** November 17, 2003, 04:23:00 PM »

OK here's my problem I'm trying to flash an xbox that I think it's v1.2, it has a doble line mobo power connector and a ST BIOS chip, I telnet to the xbox using 007 gamesave but when the orange light turn on I waited and waited and didn't here the sounds but go on and tape root and the password and it turns fine and when I try to backup the original bios the raincoat flasher says Unknow device. I think this is probably because theres a new version of the raincoat.
My question is with the st chip do I have to use a 256k or 1024k bios and how do I use the new version of raincoat 0.5?

chuckfredgoose · « **Reply #322 on:** November 24, 2003, 03:46:00 PM »

Ok I have a v1.4 or v1.5, every time I try to run AUF007 raincoat hack from load mission within the game. It goes immediately to ERROR 21 screen. I then updated Dashboard to 5659.

Tried to LOAD MISSION agian. Still Same thing happens ERROR 21.

Can someone get me out of this mess?

Badash · « **Reply #323 on:** November 24, 2003, 07:30:00 PM »

This is the 'newbie' guide!? Jeez! I must be a fetous then!

Badash · « **Reply #324 on:** November 24, 2003, 07:32:00 PM »

Will someone please mod my xbox and just take whatever they can get from my bank account so I can get on with my life!@#$%^

Gianmarco · « **Reply #325 on:** November 27, 2003, 12:37:00 AM »

Hi,

Ok well I understood the basics of the 007 TSOP flashing...but now I would just want to be sure that I can try this method on a v1.5 Xbox using 007savewithraincoat + X2 4979.06 bios (256k) ?

Has anyone already tried ?

Thx

fastbuickgn · « **Reply #326 on:** December 01, 2003, 01:03:00 PM »

I just have to tell you,I just did my first 007 tsop and it work's great i normally use pro2.2 chip's but i had a ver 1.0 box doing nothing so i figured i would give it a try and i have to tell you it works great!!!! I figured i would try the 007 with evox installer and it works fantastic , I just wanted to thank everyone who put so much time and energy into developing all these great files for the xbox and also slayer who's autoinstall is now on this box. Thank you all again

Encrypted · « **Reply #327 on:** December 03, 2003, 07:41:00 PM »

Just flashed my xbox

awsome work on this toturial. i wouldn't had the balls if it wasn't simplified like it has been here. so thanks alot. I have a question though. Will my xbox get damage if i leave the two spots soldered? i figured it woudl be best to leave it in case i need to update my bios so i dont have to go through the trouble of taking it all apart again. But im wondering if that would damage it. Can somebody answer this?

fastbuickgn · « **Reply #328 on:** December 04, 2003, 03:44:00 AM »

No it will just make it easier if you have to flash it again say with a new bios.

ar_156 · « **Reply #329 on:** December 08, 2003, 02:54:00 AM »

Mi 1.0 xBox Bios 3944 comes with Big Fonts + Phoenix 1.35i + Apple II modchip

How can I change it to TSOP???

After TSOP, what do I have to change with the HD files?

Thanks

Author Topic: The Newbie Guide To 007 - Auf Tsop Flashing (Read 1775 times)