Print

[Valhalla1]

QUOTE

by lordvader129 you only need 2 sets of points on top, not all three

I can confirm this...     This picture is widely circulated in tutorials,  and is misleading in that  most tuts say "2 points"   meaing "1 set of points"  which the picture confirms by circling in yellow,  1 set of 2 points (doubly-circled in red).  
so my friend soldered those two on his 1.5,  and re-soldered them 3 times before we decided to solder the other set of points circled in red.   worked immediately    

[hudge]

Has any one got this error. I have a v1.4 (clonewars/tetris xbox) and my solder job worked. My first attempt I was able to boot to evox (not using raincoat exploit, using evox exploit) but flash said unable to write. So I followed this tut and when I get to the last step I get this error and no flash of the TSOP. Whats up with that. Otherwise this was the easiest mod I have ever done.  Any ideas?

Thanks.

[jeditiggr]

your solder points are not done correctly
Sorry

[lordvader129]

update to raincoat .7, i dont have the link onhand, but its in exobex's sig

[choate85]

can you use the mecassault game save hack the same way?

[FoxRacR17]

Elessar, that means that the one or both of the bridges that you were supposed to solder isnt making good enough contact, check and make sure that your soldering is correct.  And did you clean the bridges before you soldered? because the board has a thin lineing of laqure.

[FoxRacR17]

So does this method also word for v1.3,1.4,1.5,and 1.6?? (however many versions there are, lol) I know that v1.0 and 1.1 need a 1meg bios file, and that every version from 1.2 on need a 256k bios files (am i right?) so does this work for all versions??

[lordvader129]

QUOTE (FoxRacR17 @ Mar 28 2004, 01:19 AM)

So does this method also word for v1.3,1.4,1.5,and 1.6?? (however many versions there are, lol) I know that v1.0 and 1.1 need a 1meg bios file, and that every version from 1.2 on need a 256k bios files (am i right?) so does this work for all versions??

i know it works for 1.0-1.5, im 99% sure it will work on a 1.6, however ATM there is no bios that supports the video chip on a 1.6

[vokal4]

i tried twice on a v1.2+ system and had no luck. i soldered all three points and i couldnt get it to erase the bios/flash

v1.0 box was mad easy tho

[WaRnINg|]

i have a modded xbox already i havent really tried this whole TSOP thing. But i have chipped 10+ xbox's..


So all i would have to do is get the save on my mem card and then take out my Chameleon.. and proceed from there to soldering the points etc..

Is there anything i should keep in mind when i comes to the HDD with all my games/UnleashX..etc?

[WaRnINg|]

Question to all the mods why havent this topic been pinned.. its seems so good and everything is clear also seems to work for so many people. Plus i see it way easier than all the others..


So why not?
Just a suggestion

[lyagushka77]

Great job on the article. I’m a complete XBOX newbie, but was able to undersatnd pretty much everything.
My problem, that I don’t have a second modded xbox. As a workaround I’d like to try to connect hard drive from the xbox to spare IDE controller on my PC and copy gamesaves and EVO-X /Avalaunch directly to the HD. Then reconnect it back to xbox and use these files.
Do you see any potential problems with that?
What is the directory structure for each one of the saves should be?

[vokal4]

1 question. does the file HAVE to be bios.bin cause i do tsop flashes for people and i hate switching back and forth between 1mb and 256kb bioses so i was wondering if it was possible to put 2 bios files in the raincoat folder (eg. 1mb.bin + 256kb.bin) and then whichever i want to flash ill run the command to flash that file. (eg. --> ./raincoat -p 1mb.bin)

[kaioshade]

i dont even know if you can fit both the 256k and 1mb bios on the card with raincoat on it as well. i think you fall just shy of th space ont he memory card.

but you can name the bios anything you want.

[snipernick2000]

so with this i can even eject it and it wont reset and itll be like jus thaveing a mod chip installed??

please let me know the pros and cons and the difference between this and a mod chip
i have 4 boxes with 2 aladdins and 2 x 2.3s
and a modder