Topic: Flash Xbox 1.2 With 007raincoat (Read 473 times)

PsiDOC · « **Reply #15 on:** May 30, 2003, 12:39:00 PM »

Smokey, Glad to help out

Have a good one.
regards,
Psi

skyhigh88 · « **Reply #16 on:** June 01, 2003, 01:52:00 AM »

Thanks PSIDOC,
I already find out how to back up my original bios with linux rc a day after my post from a buddy of mine. But, thanks again for answering my question tho.

cONEction · « **Reply #17 on:** June 01, 2003, 10:17:00 AM »

smokeingit · « **Reply #18 on:** June 01, 2003, 12:37:00 PM »

conection.. you do have to solder that point.

PsiDOC · « **Reply #19 on:** June 02, 2003, 12:34:00 AM »

QUOTE (_Access @ Jun 2 2003, 09:05 AM)

ive got probs flashing the ST tsop in a v1.2 xbox, ive flashed the winbond but i'm getting hassle with the ST

. also added Flash = 0x20B0,"ST M29F002002BT",0x40000

raincoat Flasher 0.5 Apr 14 2003 [email protected] http://xbox-linux.sf.net
Reading /etc/raincoat.conf... (unable to open /etc/raincoat.conf, using default list)

UNKNOWN DEVICE manf=0x20, dev=0xB0
Try adding the device ID to /etc/raincoat.conf

any 1 with any idea's plz

Open raincoat.conf in notepad on your PC, add the line of text to the bottom, save it. Then ftp it back to the box.
Regards,
Psi

_Access · « **Reply #20 on:** June 02, 2003, 03:15:00 AM »

PsiDOC · « **Reply #21 on:** June 02, 2003, 12:16:00 PM »

Access, I have the solution to your problem with the ST 29F002B 1.2 Xbox.
I have posted it as a new topic >>>Here<<<

Regards,
Psi

_Access · « **Reply #22 on:** June 02, 2003, 03:04:00 PM »

...DETECTED: ST M29F002BT (256K)...thx again psi ...i'm sure this would help others as well, as there was more than me with the same problem.

maybe i can invite you for tea n biscuit's

cheers

PsiDOC · « **Reply #23 on:** June 02, 2003, 11:23:00 PM »

QUOTE

maybe i can invite you for tea n biscuit's

lol Make it Beer and a Chinese take away and I'll be there

Regards,
Psi

_Access · « **Reply #24 on:** June 06, 2003, 04:47:00 AM »

PsiDOC · « **Reply #25 on:** June 06, 2003, 05:21:00 AM »

I have posted this as a topic, however I think I should add this here as well....

The Hynix - HY29F002 is now making an appearance in the 1.2 Box.
For those of you that have this chip, and want to use the 007 trick, then please use Raincoat 0.3 and add the following to the raincoat.conf

Flash = 0xadb0,"Hynix - HY29F002",0x40000

Psylord discovered this flash in his 1.2 Xbox, and after some furious e-mailing last night and this morning we eventually got it worked out.

Please note, Without Psylord I wouldn't have discovered this information.
Many thanks for the info.

regards,
Psi

PsiDOC · « **Reply #26 on:** June 06, 2003, 11:29:00 AM »

I am just glad we got it done, without too much fuss.
Regards,
Psi

smokeingit · « **Reply #27 on:** June 10, 2003, 12:27:00 AM »

QUOTE (kobe @ May 25 2003, 08:09 PM)

QUOTE (smokeingit @ May 26 2003, 02:51 AM)

manf=0*20, dev=0*B0
unknown device
6 types read

put this code in the raincoat.conf file and give it a try

Flash = 0x20B0,"UNKOWN CHIP",0x40000

sorry kobe.... i did your method first being the one that psidoc said. i know you told me first and it totally slipped my mind to give u credit...i thought u and psidoc where the same people. my huble mistake kobe. u own!

nz87 · « **Reply #28 on:** June 11, 2003, 06:34:00 PM »

EDIT: I also wanted to note that I did the 3 jumpers that were listed in this the two on top which were shown on the first post and the one under on the first post of the second page

nz87 · « **Reply #29 on:** June 12, 2003, 08:22:00 AM »

Author Topic: Flash Xbox 1.2 With 007raincoat (Read 473 times)