Topic: Flash Xbox 1.2 With 007raincoat (Read 474 times)

iwanttheagrocrag · « **on:** August 20, 2004, 03:46:00 PM »

whats up with this error i try to flash and it says this

# cd ../../media/E/UDATA/4541000d/000000000000/raincoat
# ./raincoat -p xbox.bin
raincoat Flasher 0.5 Apr 14 2003 [email protected] http://xbox-linux.sf.net
Reading /etc/raincoat.conf... (unable to open /etc/raincoat.conf, using default list)

UNKNOWN DEVICE Read Only??? manf=0x09, dev=0x00
Try adding the device ID to /etc/raincoat.conf

i even added folders called etc and put raincoat.conf files in and still nothing. where is this folder? what is going on?

help would be appreciated, i also put the flash id in the raincoat and still nothing, im stumped.

trahcwolf · « **Reply #1 on:** September 11, 2004, 06:08:00 PM »

This is a sample of what I found on my xbox...
Can anyone tell me if what is listed below
shows a necessity for upgrade...?
Xecuter2_4976.02_MultiVer_256k
EvoX V2.4
EvoX D.6
EvoX D.6 EjectFix

kobe · « **Reply #2 on:** May 23, 2003, 04:17:00 PM »

After 2 days of head banging :angry: ive finaly managed to flash 1.2 xbox

with the Raincoat utility. I assume you you already know how to copy the raincoat files to your unmodded xbox. There are a couple of methods look elsewhere for guide.
The image here, shows the 2 jumper (marked in RED) points which need to be bridged. As you can see, there is no need to take the motherboard off anymore.
(IMG:http://homepage.ntlworld.com/abdul.kabir/images/xbox1_2.jpg)
You must use the latest version of raincoat 0.5 and 256k BIOS (Xecutor 4976.02 works fine)to flash the winbond chip. download raincoat 0.5

XanTium · « **Reply #3 on:** May 23, 2003, 04:01:00 PM »

Does your xbox have a winbond chip (like the picture above) or a ST ?

I saw there are v1.2 with ST chip too now.

kobe · « **Reply #4 on:** May 23, 2003, 07:34:00 PM »

QUOTE (XanTium @ May 24 2003, 12:54 AM)

Does your xbox have a winbond chip (like the picture above) or a ST ?

I saw there are v1.2 with ST chip too now.

yes its a winbond chip

skyhigh88 · « **Reply #5 on:** May 23, 2003, 07:16:00 PM »

What's the command in Linux raincoat to back-up your oringinal xbox version 1.2 bios? I heard it's 2mb. Is it possible to back-up your original bios first before you flash the onboard winbond bios with the latest 256k x2 bios?

Can v1.2 be flashed with a multibios? if so, will the old method of installing swtichs on a19, a18, gnd, and vcc will do the same for the new version? Has anyone try this before? I want to do that with my version 1.2 box if that's possible. Any info will be preciated on this topic. Thanks in advance.

PENTIUM75 · « **Reply #6 on:** May 23, 2003, 07:19:00 PM »

the 1.2 chips is only 256K (2mbit) you can only fit one bios on it

smokeingit · « **Reply #7 on:** May 25, 2003, 05:07:00 PM »

okay i DL that raincoat version. and have 1 question.. where in the blue mighty fuck is the info on that config version...
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST SST49LF020",0x40000
Flash = 0x89a6,"Sharp LHF08CH1",0x100000
Flash = 0xda8c,"Winbond W49F020",0x40000

thats the same one i have and it does not flash the TSOP. im sure you have a winbond chip but not the one in the pick.

smokeingit · « **Reply #8 on:** May 25, 2003, 05:09:00 PM »

QUOTE (XanTium @ May 23 2003, 04:54 PM)

Does your xbox have a winbond chip (like the picture above) or a ST ?

I saw there are v1.2 with ST chip too now.

X, would i just have to edit the line to
Flash = 0xda8c,"ST W49F020T",0x40000
?

kobe · « **Reply #9 on:** May 25, 2003, 06:09:00 PM »

QUOTE (smokeingit @ May 26 2003, 02:02 AM)

QUOTE (XanTium @ May 23 2003, 04:54 PM)

Does your xbox have a winbond chip (like the picture above) or a ST ?

I saw there are v1.2 with ST chip too now.

X, would i just have to edit the line to
Flash = 0xda8c,"ST W49F020T",0x40000
?

do u get an unknown device id, if so what is it?

smokeingit · « **Reply #10 on:** May 25, 2003, 05:58:00 PM »

manf=0*20, dev=0*B0
unknown device
6 types read

kobe · « **Reply #11 on:** May 25, 2003, 07:45:00 PM »

QUOTE (smokeingit @ May 26 2003, 02:51 AM)

manf=0*20, dev=0*B0
unknown device
6 types read

put this code in the raincoat.conf file and give it a try

Flash = 0x20B0,"UNKOWN CHIP",0x40000

PsiDOC · « **Reply #12 on:** May 30, 2003, 12:08:00 AM »

Skyhigh88
Seeing as no one has answered your question, I will.
Yes you can back up your original bios using raincoat.
After telnet-ing in and changing the directory to where you raincoat file is, use this command.
./raincoat -r <<bios save filename>>.bin
and it will back up your flash.
Regards,
Psi

This post has been edited by PsiDOC: May 30 2003, 07:10 AM

PsiDOC · « **Reply #13 on:** May 30, 2003, 12:22:00 AM »

QUOTE (smokeingit @ May 26 2003, 02:51 AM)

manf=0*20, dev=0*B0
unknown device
6 types read

Smokeingit,
I am assuming this is the flash ID of the Newer ST 2 MB Flash that is now turning up in the 1.2's?
If so just add this to your raincoat.conf file.

Flash = 0x20B0,"ST 29F002",0x40000

And all should be well in your world.
Regards,
Psi

This post has been edited by PsiDOC: Jun 4 2003, 08:53 PM

smokeingit · « **Reply #14 on:** May 30, 2003, 01:35:00 AM »

thank you Psi... i did that and boom it worked..

Author Topic: Flash Xbox 1.2 With 007raincoat (Read 474 times)