Topic: Flash Xbox 1.2 With 007raincoat (Read 508 times)

cONEction · « **Reply #30 on:** June 18, 2003, 07:49:00 AM »

QUOTE (smokeingit @ Jun 1 2003, 09:37 PM)

conection.. you do have to solder that point.

well he says you dont have to take off the motherboard?

cONEction · « **Reply #31 on:** June 18, 2003, 09:28:00 AM »

maltloaf · « **Reply #32 on:** June 22, 2003, 07:27:00 AM »

i'll start with this....

Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST - 49LF020",0x40000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0x89a6,"Sharp LHF08CH1",0x100000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0x20B0,"ST 29F002",0x40000
Flash = 0xadb0,"Hynix - HY29F002",0x40000

anyone spot any errors or missing ones ??

smokeingit · « **Reply #33 on:** June 22, 2003, 10:35:00 AM »

QUOTE (cONEction @ Jun 18 2003, 10:28 AM)

well i just modded a 1.2 ST and you dont have to solder under the board, so

i dont care who says what. some people are getting there xbox killed for no reason, i asked them all about the bottom solder part and they all say the didnt short it. so i rather be on the safe side.

Pizza Pizz · « **Reply #34 on:** June 22, 2003, 10:50:00 AM »

fair doo's and thanks to again.....

but the bottom point was completely covered by a black sticky thingy....

started to peel it back carefully but it had a lot of tack to it and I thought fuck that if it peels up a track I won't be very happy indeed

so I just did the top 2 points - and worked like a charm - phew

was shitting meself, like I said I didn't fancy risking the bottom one if I may of ripped a track from under that black sticker thing

bloomin' shit's the life out ya it does that game save.....

fuck all for a few secs, then I turned up telly, jumped out my skin with all them gunshots then the eject light goes orange - hmmm don't panic I say config magic final does that

carried on and yup 256kb bios

WWWWWWOOOOOO HHHHHHOOOOOOOO

thanks again to all who helped with this kick-ass tutorial

007 has to be the best xbox game ever and that is without even playing it

no Xecuter 2.2 needed for me and my ST bios

thanks again - well impressed

tha_dude · « **Reply #35 on:** June 24, 2003, 10:36:00 AM »

i have a v1.3 xbox here the two top points soldered points look good still gettin unknown chip error tried the 007evox savegame says flash not writable i think any ideas what could be wrong?

tha_dude · « **Reply #36 on:** June 24, 2003, 01:14:00 PM »

oh forget to mention i added the winbond line to raincoat 0.5 conf file still no go

Exobex · « **Reply #37 on:** June 26, 2003, 06:30:00 AM »

QUOTE (kobe @ May 23 2003, 11:41 PM)

After 2 days of head banging

ive finaly managed to flash 1.2 xbox

with the Raincoat utility. I assume you you already know how to copy the raincoat files to your unmodded xbox. There are a couple of methods look elsewhere for guide.
The image here, shows the 2 jumper (marked in RED) points which need to be bridged. As you can see, there is no need to take the motherboard off anymore.
user posted image

You must use the latest version of raincoat 0.5 and 256k BIOS (Xecutor 4976.02 works fine)to flash the winbond chip. download raincoat 0.5

Kobe, are you 100% sure about the top two points? Looking at the diagrams of the underside of the board, I'd have thought the two to connect would be the two to the right of these (one of which is right on the white line around the TSOP).

Exobex · « **Reply #38 on:** June 29, 2003, 02:16:00 AM »

QUOTE (tha_dude @ Jun 24 2003, 09:14 PM)

oh forget to mention i added the winbond line to raincoat 0.5 conf file still no go

I've updated raincoat 0.5 slightly which may help, go here for more info.

cyraxx · « **Reply #39 on:** July 07, 2003, 06:09:00 AM »

QUOTE ("mnemonico")

Now It tries to boot 3 times, then flash the front LED Green and RED.. and stay flashing forever...

I know I´ll have to put a mod now to flash it again, but my question is, does anyone have a clue of why it didn´t work since I got no errors

I had the same problem, but I have a 1MB chip and flashed only 256KB, so I just soldered the A18 and A19 lines to GND and it worked. This shouldn't be the problem for you since your chip is only 256KB, but maybe this helps...

beer · « **Reply #40 on:** July 10, 2003, 06:58:00 PM »

QUOTE

UNKNOWN DEVICE read only??? manf=0x09, dev0=00
Try adding the device ID to /etc/raincoat.conf

I have xlinux running via the 007 exploit currently.

Is editing the raincoat.conf and then doing the HD swap the only way to update that file or can I do it via FTP

I know I can FTP to my box but, I can't login as root or upload...
Is there a seperate login....

Help

FIREitUP · « **Reply #41 on:** July 11, 2003, 06:22:00 PM »

i get manufacturers ID 09 device ID 00 Flash Not Writeable!! :/ got st using the evox loader can anyone help me here? i got ST on 1.2 i did the two top jumpers and even the one on the bottom for windbond....WTF CAN I DO!?

majik655 · « **Reply #42 on:** July 13, 2003, 11:21:00 AM »

QUOTE (nz87 @ Jun 11 2003, 07:34 PM)

I have a version 1.2 xbox and I am unable to flash it, I get the error message
UNKNOWN DEVICE read only??? manf=0x09, dev0=00
Try adding the device ID to /etc/raincoat.conf

I rechecked my points and they look good any ideas? I did not see anyone else with this error message but I could be wrong.

Thanks in advance,
NZ

EDIT: I also wanted to note that I did the 3 jumpers that were listed in this the two on top which were shown on the first post and the one under on the first post of the second page

I had your exact problem..

UNDO the jumper on the bottom of board.

and do the TOP of the board jumpers.. the 2 on top.

then use this raincoat that is "fixed conf file" by ebobex raincoat .501:
found here

then add this line to that raincoat.conf file:
Flash = 0x20B0,"ST M29F002BT",0x40000

then it worked like a charm flawlessly.

I do not know what chip was on it.. except I do know I got your same device id errors..
and mine was a ST so I added that line because it was the only one not in .501
I have no clue if it was needed.. but it worked great.

majik655 · « **Reply #43 on:** July 13, 2003, 11:30:00 AM »

QUOTE (FIREitUP @ Jul 11 2003, 07:22 PM)

i get manufacturers ID 09 device ID 00 Flash Not Writeable!! :/ got st using the evox loader can anyone help me here? i got ST on 1.2 i did the two top jumpers and even the one on the bottom for windbond....WTF CAN I DO!?

UNDO the bottom jumper ....

use raincoat .501 by exobex :
"Download raincoat-0.501.zip HERE , replace your existing raincoat and raincoat.conf files (the ones in your 007:AUF Linux save) with the ones in my ZIP file. "

then add this line to that raincoat.conf file :
Flash = 0x20B0,"ST M29F002BT",0x40000

then try to flash it again.

This worked for me... and hopefully for others ST

smokeingit · « **Reply #44 on:** July 13, 2003, 03:26:00 PM »

AND i even made a guide, the wonderful world of search. http://forums.xbox-s...tupid,and,guide

Author Topic: Flash Xbox 1.2 With 007raincoat (Read 508 times)