Topic: Bridged Write-enable Points Makes Xbox Not Boot (Read 50 times)

smokeingit · « **on:** May 24, 2003, 01:55:00 AM »

i thought i made a post of this 2 months ago.... the correct way of doing is unbridging the bottom write enable. once the unit boots up rebridge it.

smokeingit · « **Reply #1 on:** May 24, 2003, 10:45:00 AM »

oh top ones work as well? we had issue's on this at xboxhacker. but i will try it again from the top and see if it works. it would make it alot easier =) no need for apologies

smokeingit · « **Reply #2 on:** May 31, 2003, 11:36:00 PM »

Frags huh? then some how you screwed it up... well first off, take the damn P11 to 5+ off the damn mobo... (yes you fucked up) that connection is for sharp bios's that need a force flash. then 2nd tell us what Xbox you have and bios version.

smokeingit · « **Reply #3 on:** June 01, 2003, 12:40:00 PM »

well now you have to use the raincoat method. boot it with A19 *VCC bridged, then once it boots open the switch to it can flash the whole chip and not part of it. and do it again.

galo2 · « **Reply #4 on:** June 01, 2003, 09:06:00 PM »

Ok, fixed my problem.
I screwed up things when using D6 in combination with the original bios. The only way to make my xbox to work again (without bridging A18 or A19) was to reflash with D6+D6+D6+D6.

This is working fine for me now.
The reason I flashed all D6 is I'm not going to put switches to bridge A18 or A19 right now... maybe sometime later but not now.

Tks

Author Topic: Bridged Write-enable Points Makes Xbox Not Boot (Read 50 times)