Topic: Flash Tsop With X2 (and Others) 12c508 Code (Read 607 times)

STEVEHABS · « **Reply #60 on:** August 04, 2003, 11:16:00 AM »

heh heh yes i know that now found that out yesterday also complex's loader which is cool now supports every version if u use a plugin wit the original 1.0 version. dunno if u will know this but ok so u do the exploit by putting boot.cfg pheonix.raw and default.xbe on the xbox hard drive via the mega x key memory card and then u should have a iso of the pheonix loader 1.3 files on cd or dvd right and run that program and load the new bios and then u could take that out and the effects will be permanent right. and then lets say i wanna run doomx from a dvd r i could put that in and it would run ok right? also do u put your bios file which u name to xboxrom.bin in pheonix boot folder imagebld folder or in the root where the 3 main files for the exploit are

thanks in advance and just in case above all else i patched and basically signed the default.xbe just to make sure everything goes ok.

boowhup · « **Reply #61 on:** August 20, 2003, 04:38:00 AM »

Is there a flash_tsop bios compatible with 1.1 mobo's now?

venturahighway · « **Reply #62 on:** August 20, 2003, 08:14:00 PM »

QUOTE (boowhup @ Aug 20 2003, 01:38 PM)

Is there a flash_tsop bios compatible with 1.1 mobo's now?

as of 8/20/03 no.

venturahighway · « **Reply #63 on:** August 20, 2003, 08:50:00 PM »

Pizza Pizz · « **Reply #64 on:** August 22, 2003, 06:52:00 AM »

uhm 1.2's are 256kb bios like the 1.3's

However - always check the mobo & tsop itself just in case.....

I had a 1.2 that was really a 1.1:

Jan 2003 date, serial ending with 30xxx - but when opened up had this strange thing inside and seal/sticker wasn't tampered with or been opened:

1.1 mobo with the normal single row psu connector
samsung dvd - was reason why I bought it
8gb western digital h/d not the usual 10gb black seagate or better white 10.2gb seagate
(h/d was made in Nov 2002 like samsung dvd was so this must have been some last bit of 1.1 they put together they had lying around)
didn't check the tsop coz fitted cheapmod in there but would have been a 1mb even though the date and the S pack box would have implied this should of been a 1.2 with it's atx psu and 256kb bios

you can flash a 1.1 tsop if it's a commonly used ST or Hynix type of mobo

though I normally fit a lpc cheapmod on there with the header pins on ver 1.1's if the LPC holes aren't usually filled in with solder

1nick9 · « **Reply #65 on:** August 24, 2003, 09:32:00 PM »

1nick9 · « **Reply #66 on:** August 24, 2003, 11:08:00 PM »

but now i need to flash my mod back and i can't

any1 hav any ideas

venturahighway · « **Reply #67 on:** August 29, 2003, 01:44:00 PM »

QUOTE (00XeRo @ Aug 29 2003, 08:46 AM)

QUOTE

hmmmm, ok, i think i did this right, i flashed my x2lite with the evox_matrix_tsop bios and i restarted my xbox and now the little eject light cycles grean, orange, red, etc, sometimes it will blink only green for about 2 seconds then it resumes, did i fuck up already?

edit 2: heh, a15 has to be grounded for this to boot right? thats why im getting those flashing lights? i think thats why thats happening

Is the non grounded A15 the problem???

Becuase I'm getting the lights as well

are you disabling the modchip 1 second after power on?

wtaag · « **Reply #68 on:** September 01, 2003, 07:53:00 PM »

QUOTE (00XeRo @ Aug 29 2003, 08:07 PM)

The whole chip?
I thought it was just the 4th DIP switch.

Well, anyways I tried both.

When I turn the chip off after one second it tries to load my TSOP and just frags... (trying to fix bad tsop)

Should I keep trying, or is this not going to work to fix the bad tsop?

I'm looking to fix a bad flash as well. Using a X2.1 Lite.

DJLotus · « **Reply #69 on:** November 09, 2003, 08:44:00 AM »

don't wanna sound way too dumb, but I don't exactly know where the A15 is supposed to be connected on the chip (i have an X2.2 pro) or on the solder points on the board? i have read the several tutorials on flashing tsop w/a lpc chip by using some special bios (got everything i need) just don't know where it goes. please give me some guidance.

Thanks much,
John

AlienTiger · « **Reply #70 on:** December 02, 2003, 10:16:00 PM »

Ok I understand flashing the bios but why would you flash the TSOP and to be honest what is the TSOP

B1ff · « **Reply #71 on:** December 13, 2003, 07:03:00 AM »

QUOTE (Ubergeek @ Apr 16 2003, 06:32 PM)

QUOTE (BorgKing @ Apr 13 2003, 07:16 AM)

Will this method work with xecuter 1?

yes you can use this - X1 used the same basic principal of d0 on enable / off disable

I'm confused - doesn't this require the EvoxMatrixTSOP BIOS? Which isn't possible with the X1. (Except perhaps with Phoenix?)

HDTV MAN · « **Reply #72 on:** December 25, 2003, 06:48:00 PM »

will this method work on a 1.3 or 1.4??

Author Topic: Flash Tsop With X2 (and Others) 12c508 Code (Read 607 times)