Topic: Xenium Questions (Read 227 times)

wh00pass · « **Reply #15 on:** February 23, 2007, 10:14:00 PM »

i had my friend who can solder good help me with installin on my xenium gold. and he read something were the two (blue and black) wire thing connects to your modechip, and he just cut im up for no reason, he used im for the lpc rebuild, and then i burnt a trace on my xbox(it was my fualt) and i didnt feel like fixing it so i ordered some new virgin mobo's off ebay, iv been prety patient the past couple of weeks and i still am.. my mobo's should arrive soon, but then i read somewere that you have to connect the blue wire to the d0 and griund the blac?? ur somthing. and the connecter is gone now, im a screwed and have to get a new one or what?

thanks i have 1.6 xbox and xenium gold

CJLee89 · « **Reply #16 on:** February 24, 2007, 06:26:00 AM »

the harness is unneeded for a 1.6. all you need is the SP adaptor (white curved piece) and your good to go.

CJLee89 · « **Reply #17 on:** February 24, 2007, 06:28:00 AM »

the wire just sticks in the hole. no need to solder unless you are afraid of it coming loose. i have a completely solderless setup and mine as never came loose. i take it with me alot to my friends house or wherever and i carry it in a duffle bag with all the accessories. neve came loose for me.

wh00pass · « **Reply #18 on:** February 24, 2007, 01:08:00 PM »

im doing a lpc rebuild, wtf is the white craved peice? solderless adapter?

CJLee89 · « **Reply #19 on:** February 24, 2007, 02:01:00 PM »

http://www.divineo.c...d-xb-univspadap

CJLee89 · « **Reply #20 on:** February 24, 2007, 02:05:00 PM »

the d0 wire comes out of the adaptor into the d0 connection hole. there is no soldering to the LPC with a d0 connection.

http://teamxodus.com...n...etit&lid=48

wh00pass · « **Reply #21 on:** February 24, 2007, 11:41:00 PM »

I finished my lpc rebuild and i guess it aint so bad for my 2nd atempt, i plugged in my chip and it fragged, then i took it out and it then turned it on and it booted up, WTF
do i go back and check my connections? or is my chip bad?

---xenium gold---
---1.6 xbox---

TonyF11 · « **Reply #22 on:** February 25, 2007, 01:03:00 AM »

As you suggest go back and check the lpc rebuild and all connections. 99% of all frags are usually down to a bad install and very rarely are the actual chips bad.

wh00pass · « **Reply #23 on:** February 25, 2007, 03:26:00 AM »

grrr, this is nerve racking, anything can be wrong, thanks, well at least my xbox still boots up, with all the connections, but do you solder the top d0 wire to the lpc?

the hobo · « **Reply #24 on:** February 25, 2007, 08:45:00 AM »

QUOTE(CJLee89 @ Feb 24 2007, 09:08 PM)

http://www.divineo.c...d-xb-univspadap

will he not need the black pogo pin thing or does the sp adapter work with the pin header thing too

CJLee89 · « **Reply #25 on:** February 25, 2007, 08:54:00 AM »

the SP adaptor sits on top of the black base so they work together.

CJLee89 · « **Reply #26 on:** February 25, 2007, 09:01:00 AM »

the spice guide in my sig explains it all. blue is the d0 and black is ground on the LFRAME wire harness. and it plug into the chip.

and stick with one topic with all these. they are all related no need to make a million topics.

the hobo · « **Reply #27 on:** February 25, 2007, 09:12:00 AM »

QUOTE(CJLee89 @ Feb 25 2007, 04:01 PM)

the SP adaptor sits on top of the black base so they work together.

ah so the thing you linked too includes the black pogo base

CJLee89 · « **Reply #28 on:** February 25, 2007, 09:20:00 AM »

no, the black base should have came with the chip IF he got the solderless solution and even that should have came with both. if he didnt then the only thing he would have got is the pin header.

mine came with all 3. (universal adaptor(black base), SP adaptor, and pin header)

the hobo · « **Reply #29 on:** February 25, 2007, 09:47:00 AM »

QUOTE(CJLee89 @ Feb 25 2007, 04:27 PM)

no, the black base should have came with the chip IF he got the solderless solution and even that should have came with both. if he didnt then the only thing he would have got is the pin header.

mine came with all 3. (universal adaptor(black base), SP adaptor, and pin header)

yea mine came with all three too but hes done the rebuild so im presuming he didnt buy the solderless one so surely he will need the balck base bit too?

Author Topic: Xenium Questions (Read 227 times)