Topic: Changing The Color Of The Boot Screen In Evox (Read 64 times)

wildone270 · « **on:** January 29, 2007, 08:11:00 AM »

I want to change from that ugly green X and text to a color I like. I wondered how I can go about accomplishing this task. Also I wouldn't mind changing the boot sounds either.

Thanks for all your help in advance,

1hotjob · « **Reply #1 on:** January 29, 2007, 08:46:00 AM »

If you are softmodded you are stuck with what you have.

If you have a mod chip you can change the settings.

wildone270 · « **Reply #2 on:** January 29, 2007, 09:04:00 AM »

I have the Xenium SP Ice chip installed, and Slayer Disc software, but don't see any setting to allow that kind of change?
do I need a certain software? I tried XBtool but couldn't figure out how to use it.

This post has been edited by wildone270: Jan 29 2007, 05:11 PM

1hotjob · « **Reply #3 on:** January 29, 2007, 12:02:00 PM »

Do a search here on "modify bios" or "change flubber".

I haven't done it so I can't tell you if Xbtool is the right software.

You would have better luck in the mod chip section. I am moving this post there.

CJLee89 · « **Reply #4 on:** January 29, 2007, 01:36:00 PM »

QUOTE(wildone270 @ Jan 29 2007, 10:35 AM)

I have the Xenium SP Ice chip installed, and Slayer Disc software, but don't see any setting to allow that kind of change?
do I need a certain software? I tried XBtool but couldn't figure out how to use it.

what bios are you running? idk which one comes on the slayers

This post has been edited by CJLee89: Jan 29 2007, 09:39 PM

ScrewinGates · « **Reply #5 on:** January 29, 2007, 05:59:00 PM »

check the tools on xs main page and get the one for your bios.theres all sorts of stuff u can change. mine boots red to match my leds.its pretty cool not to see the same green stuff forever.

CJLee89 · « **Reply #6 on:** January 30, 2007, 08:01:00 AM »

QUOTE(ScrewinGates @ Jan 29 2007, 07:30 PM)

check the tools on xs main page and get the one for your bios.theres all sorts of stuff u can change. mine boots red to match my leds.its pretty cool not to see the same green stuff forever.

again i ask what bios are you running?

we want to help ppl not let them defend for theirselves

wildone270 · « **Reply #7 on:** January 31, 2007, 06:32:00 AM »

My current skin tells me bios: unknown Kernal: 1.00.5838.01 and evox: +3935? Even ran Xbox Bios Checker 4.0b and it says unknown as well. Whatever it takes to get some help. I did find my old disc I used when i moded it originally it has the m8.bin, m8_16.bin and m8plus_16.bin on it. Not that I can remember which one I used mind you but i think they are all the same pretty much.

This post has been edited by wildone270: Jan 31 2007, 02:42 PM

CJLee89 · « **Reply #8 on:** January 31, 2007, 09:54:00 AM »

QUOTE(wildone270 @ Jan 31 2007, 08:03 AM)

My current skin tells me bios: unknown Kernal: 1.00.5838.01 and evox: +3935? Even ran Xbox Bios Checker 4.0b and it says unknown as well. Whatever it takes to get some help. I did find my old disc I used when i moded it originally it has the m8.bin, m8_16.bin and m8plus_16.bin on it. Not that I can remember which one I used mind you but i think they are all the same pretty much.

FTP into your xbox and find the bin file. that will tell you where what it is.

This post has been edited by CJLee89: Jan 31 2007, 05:55 PM

wildone270 · « **Reply #9 on:** January 31, 2007, 11:18:00 AM »

Where would I look for it I don't see it in c drive or f drive. on E drive i did find a folder called recovery hdd i suppose I could add a bios file there but that doesn't tell me which one I have now however. Sorry for beign such a bother.

wildone270 · « **Reply #10 on:** January 31, 2007, 12:21:00 PM »

I figured it out thanks to all who answered my questions and gave some time to help!!

wildone270 · « **Reply #11 on:** January 31, 2007, 01:25:00 PM »

Just to help people I suggest getting the M8plus_16.bin file. load that into EVtool after you make your changes resave. Exit EVtool. Then FTP the newly changed file to a folder on your HD and remember where you stuck it. Then boot xbox if you have a xenium chip instead of loading the bios choose add. Go find it on your drive add name and set LED color if you like. then boot with that one to see your color changes!!!! Have Fun!!

CJLee89 · « **Reply #12 on:** January 31, 2007, 01:41:00 PM »

good to hear (IMG:style_emoticons/default/smile.gif)

well i feel like an idiot. you should have told you to use EVTool to edit your evox bios. my bad. glad you got it though.

This post has been edited by CJLee89: Jan 31 2007, 09:45 PM

Author Topic: Changing The Color Of The Boot Screen In Evox (Read 64 times)