xboxscene.org forums

Author Topic: My 2 Cents On Xeniums Chips Fragging  (Read 52 times)

blakksmiff

  • Archived User
  • Newbie
  • *
  • Posts: 19
My 2 Cents On Xeniums Chips Fragging
« on: November 21, 2005, 11:37:00 AM »
I just wanted to give my 2 cents on this issue. Anyone that has installed a solderless adapter with the Xenium and has all the lights on the adapter light up, and still gets a FRAG (or what looks like a FRAG), take a moment to verify whether or not you connected the chip to the adapter correctly. When connected properly the LED on the chip should be green once you power on. I know this may seem pretty idiotic, but I was attempting to do a mod the other day and this simple mistake caused my progress to be delayed by an hour. From one newb to another.
Logged

Pantera Opeth

  • Archived User
  • Newbie
  • *
  • Posts: 24
My 2 Cents On Xeniums Chips Fragging
« Reply #1 on: November 21, 2005, 11:46:00 AM »
If you mean, not lining the chip properly to the adapter when connecting it, I did the same thing when I got my first one.  But it didn't take me an hour to figure out, I'm happy about that.  Once I saw the chip was lighting Red and that the xbox was booting straight to the msdash I knew it was an alignment error.

But yeah, good info for people new to installing chips to know
Logged

blakksmiff

  • Archived User
  • Newbie
  • *
  • Posts: 19
My 2 Cents On Xeniums Chips Fragging
« Reply #2 on: November 22, 2005, 11:43:00 AM »
See, my box would not even boot to the M$ Dash. It just turn on/off/on/off/on and i got a blank screen. My first thought was that the chip was screwed being that I bought it second hand. I had the chip installed so that the Xenium logo was facing away from the edge of the board. I soon realized this was wrong.
Logged

jROC99

  • Archived User
  • Full Member
  • *
  • Posts: 186
My 2 Cents On Xeniums Chips Fragging
« Reply #3 on: December 01, 2005, 09:03:00 AM »
The best rule is...

DON'T BUY SOLDERLESS MODCHIPS smile.gif

jROC
Logged