Topic: Xenium Ice Chip Problem (Read 32 times)

steelmodded1 · « **on:** August 11, 2005, 02:03:00 PM »

ok i have two xboxs without any dashboards and i was told to get a modchip and that guy told me to get a Xenium Ice modchip and so i did and i was installing it and my friend came over and was helping me and broke the D0 wire on the solderless adapter is that bad?! and if there is a way i can burn a dashboard onto a Cd please help me out and if i can burn or flash a dashboard onto the chip without using the D0 point on the solderless adapter please help!!

P.S. i have XBox #1 is a 1.1 and the #2 is a 1.6

porsche6714 · « **Reply #1 on:** August 11, 2005, 09:27:00 PM »

steelmodded1 · « **Reply #2 on:** August 12, 2005, 10:57:00 AM »

yea thats the main problem i did with the part i broke off the adapter and i cant FTP anything bc i have no dashboard to go to and i cant even play games at all it goes straight to the error screen but i am using the blue and black wire for the D0 wire but i need to kno exactly what files i need to burn on my CD-RW or DVD-RW

wahman143 · « **Reply #3 on:** August 12, 2005, 01:29:00 PM »

You're not going to get far without the D0. That's the main interface that the chip uses to communicate with the board. Fix that first, then worry about what to put on disk. BTW, an Auto-Installer would work nicely if you're FTP-shy.

Edit - what about the alternate D0 on the bottom of the board? You could use the wire that comes with the Xenium kit and access that one. Read the Iceguide - it will tell you how to access that point.

Wah

steelmodded1 · « **Reply #4 on:** August 12, 2005, 01:44:00 PM »

ok i9 cANt find a ICE guide i look at the xbox-scene.com guides and no ice guide i looked everywhere so if you have the link plz give it to me plz and this is what it looks like user posted image

steelmodded1 · « **Reply #5 on:** August 12, 2005, 02:01:00 PM »

and i need to know the exact file i need to burn to a CD-RW or DVD-RW and if you have them maybe you could send them to me

P.S. i kno its a bad picture quality

wahman143 · « **Reply #6 on:** August 12, 2005, 02:21:00 PM »

http://www.teamxodus...op=getit&lid=41

wahman143 · « **Reply #7 on:** August 12, 2005, 02:23:00 PM »

And, to install a dash, you just can't burn the file to disk and xfer it. Either FTP the dash file over to your box or get an Auto-Installer like Slayer or AID2. They're in the usual places (not sure about aid).

porsche6714 · « **Reply #8 on:** August 12, 2005, 02:36:00 PM »

actually you do not ever need to burn a disc. The Xenium ice modchip has built in FTP abilities in the Operating System. You do not need a dashboard to ftp. Just turn on you xbox and leave it at the Xenium main menu. Then go to your pc and use flashFXP or something similar and transfer the bios to one of the drives. Then go back to the chip and flash the bios.

wahman143 · « **Reply #9 on:** August 12, 2005, 02:39:00 PM »

Porche,
That's what I'd do, but he seems to want to burn disks. Need to get that D0 working right, then take Porche's advice and FTP as opposed to burning coasters.

Files can be found on Evolution-X's website or the usual places.

steelmodded1 · « **Reply #10 on:** August 14, 2005, 09:30:00 PM »

i dont have a Main Menu for my Ice chip when i start my xbox up it goes to the error screen 16 the same way it does befroe i had the chip i guess its the D0 wire connection bc it broke off and i dont kno where that piece is so yea i guess ill have to solder it or something

Author Topic: Xenium Ice Chip Problem (Read 32 times)