Topic: Xenium S.p. Ice Vs. Xenium Ice (Read 182 times)

XBL_SUCKS · « **on:** March 09, 2005, 03:12:00 PM »

I have a xecuter chip soldered onto my 1.1 mobo. I don't like the options of my chip I am thinking of buying a xenium ice chip which one would you people recomend and what are some of the pro's and con's about both chips '

Thanks

acemilo · « **Reply #1 on:** March 09, 2005, 03:30:00 PM »

The sp just comes with the 1.6 solderless adapter with the chip. If you already have xn xecuter soldered, just pull it off, solder the new d0/ground hardness to the mobo and plug it onto the pin header and your set.

2XNKOTE · « **Reply #2 on:** March 09, 2005, 03:35:00 PM »

if you have 1.1 mobo you wont need sp-ice, just xenium ice, as sp adaptor is just if you want solderless on a 1.6

fujitech · « **Reply #3 on:** March 09, 2005, 04:29:00 PM »

S.P.Ice = Solderless Pro adapter (1.0->1.6)+ ICE

pin configuration on the adapter is for xenium only!
xenium works with 3.3V not 5V

soon will be Solderless Pro with pin configuration for all chips
incuding solderfree 5V connector

if u get S.P.Ice and dont hav a 1.6 then just
DONT USE THE PCB and also use the small ring instead of the big one!!!!!

XBL_SUCKS · « **Reply #4 on:** March 09, 2005, 06:04:00 PM »

Thanks for all the info saves me a little bit of money and time

2XNKOTE · « **Reply #5 on:** March 09, 2005, 07:56:00 PM »

QUOTE(fujitech @ Mar 9 2005, 11:35 PM)

if u get S.P.Ice and dont hav a 1.6 then just

2XNKOTE · « **Reply #6 on:** March 10, 2005, 05:48:00 AM »

wiler1 · « **Reply #7 on:** March 10, 2005, 02:03:00 PM »

im pissed, i jsut got my adapter for my 1.6 and have an executer 2.6. They said it would work with all current chips and now it doesnt work. WTF!!

acemilo · « **Reply #8 on:** March 10, 2005, 02:10:00 PM »

Return the adapter and use the money to pay someone to install it for you. Its been said to death already that they misled ppl, but now they finally went public (on the main page) clarifying that the spice adapter is not xecuter compatable.

leijae · « **Reply #9 on:** March 11, 2005, 07:30:00 PM »

i did a search on how to install the new S.P, but i can't find it. can someone please direct me to the right place?

ModWhiz · « **Reply #10 on:** March 11, 2005, 08:40:00 PM »

Xenium SP ICE manual here:

http://teamxodus.com...op=getit&lid=64

Enjoy!

Regards,

ModWhiz.com

sofa · « **Reply #11 on:** March 14, 2005, 08:15:00 PM »

the spice adapter comes with leds on all the lpc ports so you know if it is hooked up properly by looking at the leds its fool proof. get the ice and save money inless ur a dumb ass

Author Topic: Xenium S.p. Ice Vs. Xenium Ice (Read 182 times)