Topic: Getting A 200 Gig Drive To Detect Fully (Read 76 times)

celinedrules · « **on:** March 04, 2005, 08:58:00 PM »

Since it shows up but only as 0 bytes, did you try formatting it?

acemilo · « **Reply #1 on:** March 04, 2005, 10:28:00 PM »

4974 doesn't support lba48. Download x2 4983.06 and flash it with that, then use slayers, not the xenium os, to format the drive.

Vasher · « **Reply #2 on:** March 05, 2005, 05:43:00 AM »

No, if you want an F and G, make sure G is formatted and flash the Xenium w/ 4983.67. X2 4983.06 is for all F (drive 6 or 06), 4983.67 is for F and G (drives 6 and 7).

appleguru · « **Reply #3 on:** March 05, 2005, 09:34:00 AM »

QUOTE(gren @ Mar 5 2005, 10:29 AM)

sounds like thats just what i'm looking for, unfortunantly i'm haveing a bit of trouble tracking it down, from what i can tell xbins dosn't have it, could anybody point me in the direction of that file?

appleguru · « **Reply #4 on:** March 05, 2005, 09:34:00 AM »

[double post....]

gren · « **Reply #5 on:** March 05, 2005, 02:03:00 PM »

thanks thebroken, i'll give that a try as soon as i get home from work but i think that *should* do the trick.

acemilo · « **Reply #6 on:** March 05, 2005, 03:02:00 PM »

1- Download x2 4983 bios file, it has both .06 and .67
2- Make 4983.06 512 (there is a batch file that does it for you included in the package)
3- Flash it to the chip
4- Format the hd using slayers

Done. A lot easier than 10 steps.

Gumba · « **Reply #7 on:** March 05, 2005, 03:43:00 PM »

QUOTE(thebroken @ Mar 6 2005, 02:52 AM)

ok here we go

Gumba · « **Reply #8 on:** March 05, 2005, 03:44:00 PM »

QUOTE(acemilo @ Mar 6 2005, 08:08 AM)

1- Download x2 4983 bios file, it has both .06 and .67

acemilo · « **Reply #9 on:** March 05, 2005, 09:50:00 PM »

QUOTE(Gumba @ Mar 5 2005, 10:50 PM)

You don't need to extend bioses to 512KB for the Xenium.

Author Topic: Getting A 200 Gig Drive To Detect Fully (Read 76 times)