Topic: Xenium.......help........please (Read 59 times)

Silentscream__ · « **on:** February 01, 2005, 10:56:00 AM »

QUOTE

i have just finished installing my xenium ice and i dont know what to do next, it comes up with the os and everything is okay, but i dont know how to set up the external switch, its a switch right?

No, its not a switch, its a status LED board to tell you which bios you have booted/show error lights etc.

QUOTE

and how does it fit four bios and what bios is it compatibile with, i know that i can use the x2 4983 but i cant be bothered starting to split the bios so could i use the evox m8plus, just burn the bios.bin with a dummy file and then flash? please dont tell me i need to start splitting it like the x2 bios!

It is compatible with any bios (apart from the BFM bioses) All you need to do is set up your network settings, FTP to the xbox, send the bios file to the E:\ drive on the xbox, then use the 'add item' option in the launch menu section of the Xenium OS to find the file and flash the chip with it. Easy.

If i was you i would head over to www.teamxodus.com and read throught the tutorials there.

X-XBOXING · « **Reply #1 on:** February 01, 2005, 11:25:00 AM »

hi

first off all i already read all the tuts on the official site, they are shit!

second, how do you turn the chip off? (run ms bios)

okay so just answer this please, can i take the m8 bin then ftp it to the e or were ever then flash it, the whole point is that i would not need to split the bios!

and thanks for the help guys, im not a total noob i have installed about 10 xecuters but there is no solid help (idiot proff) on their site.

GuyBrush · « **Reply #2 on:** February 01, 2005, 11:28:00 AM »

I've never used anything else........

X-XBOXING · « **Reply #3 on:** February 01, 2005, 11:38:00 AM »

i know same here, i always use it with my x3 is it possible to do that with this chip?

plus..what bios did you use and how do you disable the chip....please help....

Silentscream__ · « **Reply #4 on:** February 01, 2005, 11:52:00 AM »

To disable the chip, you go to add a launch item, then from the TSOP. This will place a link in the Xenium OS to boot from the TSOP disabling the chip.

X-XBOXING · « **Reply #5 on:** February 01, 2005, 12:33:00 PM »

i am hearing alot of good about the IND-BIOS so i guess ill use it.

did you say i need number 6? ( on a version 1.3 xbox)

and after i flash the bios how do i flash a different one?

and after i chose tsop so i can boot the ms bios do i need to chose it every time how will it work then?

EDIT: i am really thankfull for you help!

X-XBOXING · « **Reply #6 on:** February 01, 2005, 02:53:00 PM »

hello again

YES I DID IT

its a bit complicated but once you understand ow it works its a great chip!
not too sure if its good for "newbs" but i like it!

if i had to chose between it and my x3 sorry but it will win x3 kicks ass!

S1ack · « **Reply #7 on:** February 01, 2005, 06:43:00 PM »

Those 'shit' tuts answered all your questions. noob-friendly no-less.

But I can see where another thread on another board, was needed.

If patience is a virtue, impatience is a vice.

acemilo · « **Reply #8 on:** February 01, 2005, 08:45:00 PM »

Um, since when do you have to split an x2 bios? The x2 bioses come as 256k and if you want you can make it 512k or 1mb, which is the OPPOSITE of splitting. Whoever told you have to split an x2 bios is a retard, they come as 256k from xecuter.

tutyet · « **Reply #9 on:** February 02, 2005, 11:15:00 AM »

i think the same as you, its a good chip but not for the noobs!

Silentscream__ · « **Reply #10 on:** February 02, 2005, 12:26:00 PM »

QUOTE(tutyet @ Feb 2 2005, 05:21 PM)

i think the same as you, its a good chip but not for the noobs!

Author Topic: Xenium.......help........please (Read 59 times)