Print

[detsub]

when i hit power, the led on the xenium goes red >> green >> solid red

is that normal?

[acemilo]

Nope, check your soldering, something probably isnt getting good contact.

[detsub]

solderless adaptor... what could be wrong? it works

[vjreddy12]

Do you have the ICE chip ?

and also...

Are you booting into the OS ?

[detsub]

yea ICE chip... booting to the x2 os by the power button, i put the auto boot on, so when i hit the power it goes to x2 and the reset button goes to the os 2.0

[playa42018]

I have this problem a lot too.

Try repositioning your D0 Wire thing.

[detsub]

its nto a problem since it boots and works fine, i just don't know why it goes green before staying solid red, even when i push down on the adaptor and hit power, it still does it

[vjreddy12]

Did you set the Red colour to the default bios? or is it red when the chip is it its OS ?

[detsub]

when i first turn on my box, it goes red then quickly goes green, and turns back to red and stays red... doesn't change

[vjreddy12]

What colour did you set to your X2 bios when you flashed it to the chip ? I used "Blue" (The OS asks you this question just before flashing the bios to the chip)

So when i seleted "Blue" for the default X2 bios the following happened....

Turn on my box with the "Power" button, it goes red then quickly goes green, then stays "Blue".

I am at work at the moment but will confirm for you when i get home....I am sure that the LED does filicker different colours at the start, just not sure which one's.

[detsub]

ooo... in that case i must have picked "red" for the color of the bios... I completely understand what your saying now.

[Gumba]

QUOTE (detsub @ Aug 17 2004, 08:50 AM)

when i first turn on my box, it goes red then quickly goes green, and turns back to red and stays red... doesn't change

I find that the Xenium LED (the one on the Xenium) goes Red, then Amber, then to off if you boot to XOS or to your BIOS colour if you boot a BIOS (ie Blue, Red, or whatever you set)

BUT my Xternal LED goes Red, then Green, then BIOS colour... I think this is because I have the dimmer set to on, you can actually see a little bit of the red LED when the green one is on, but its not bright at all.

I'm guessing the problem is that amber looks like green on the XLED when the dimmer is set on.


That's okay, red->green->bios suits me

(I have blue, red and green bioses)

[detsub]

aight yea, i forgot about when i chose red for the x2 bios...i gotta open up by box and put on my external led

[detsub]

make sure there isnt any solder "connecting" two lpc holes...aka, too much solder

[adamf14]

if you have no light check the switch on the mod chip...that was my problem