Topic: Xenium Ice On 1.0 (Read 92 times)

mai0f · « **on:** August 13, 2004, 08:02:00 AM »

hey all i gotta make this quick,
my buddy put a xenium ice on his 1.0...
it boots about 10% of the time, but only to the xenium os... i put x2 bios on it... 4981 i think, but it doesn't boot to it..... most of the time i get a frag.... but when i dont, i get only the xenium OS... i've gotten it to boot ONCE to the x2 bios, but that was when i was setting up a new hd.. so it didn't go anywhere....
the problem is, that the ONLY computers i'm on are going through a firewall, and there's not much i can get to.... x-s is blocked, but the forums aren't.... ozxodus
site is blocked too....

can someone help please??

thanks,
mai0f

Master-Chief · « **Reply #1 on:** August 13, 2004, 08:14:00 AM »

mai0f · « **Reply #2 on:** August 13, 2004, 10:44:00 AM »

yeah... i used the pin headder method/// it was done fairly quick..... so i'll recheck it...
oh.. and what's the switch on the chip for? and can i have ONLY the chip in w/o the ?lcd? board thing?

thanks,
mai0f

Superdoop · « **Reply #3 on:** August 14, 2004, 04:25:00 PM »

I just put together a friends box with this chip, and this thread helped me! Thanks!

mai0f · « **Reply #4 on:** August 14, 2004, 05:32:00 PM »

is there any extra wires for a 1.0? i have the pin headders and the d0 and the ground.....

anywho.... thanks,
mai0f

mai0f · « **Reply #5 on:** August 22, 2004, 06:34:00 PM »

UPDATE:
alright... i had some time today to open her up and look inside....
the top d0 point appears to have been ripped out... it's missing about 1/8 inch of the trace, and he had it soldered on the WRONG alternate d0, i fixed it on the bottom...
i can boot to the xenium OS fine, but not any bios
i just have 2 questions for now... (until i can do further testing)

1. with the top d0 "broken", should the ice still be able to boot (a bios) using the alternate d0 point? or does the top need to be repaired?

2. does the "Xternal LED " have to be connected? or can it work w/o it?

thank you much,
mai0f

XboxDude87 · « **Reply #6 on:** August 22, 2004, 09:31:00 PM »

1. i should think so.

2. the external led is optional, but a good addon

mai0f · « **Reply #7 on:** August 23, 2004, 03:53:00 AM »

smack_blitz · « **Reply #8 on:** August 23, 2004, 05:57:00 AM »

it would be best if u fixed the top.

just a thought
maybe it's the chip......... broken or something

XboxDude87 · « **Reply #9 on:** August 23, 2004, 11:34:00 AM »

if the top d0 is totaly screwed up and the trace is broken.. you have to fix that or the alternate won't work either

mai0f · « **Reply #10 on:** August 26, 2004, 05:33:00 PM »

WOOHOO!!! thanks all, i fixed it..... now i have burnt fingertips.... but oh well....

i just ran a wire from where the d0 was broken on the top, to the underside of the mobo... no to the alternate, but to where the d0 continues, there is a spot where you can solder to w/o having to prep the spot... took a while to find since my eyes aren't as great anymore.... but after about 30min and ALOT of patiants.... i got flubber....

thank you all, you guys rock......

thanks,
mai0f

Author Topic: Xenium Ice On 1.0 (Read 92 times)