Topic: Newbie Guide To Instaling Xenium Ice, Bios, Evox (Read 161 times)

ModNewb · « **on:** July 13, 2004, 11:22:00 AM »

Nice job! Thanks for putting this together..once i get my Xenium Ice ill be sure to use this tut

prophet74 · « **Reply #1 on:** July 13, 2004, 01:01:00 PM »

Nicely Done. I have a quick question for anyone to answer. I flashed with latest Xecutor BIOS (List item2 (1 is Default Kernel)). When I choose that in the Xenium (OS2) menu, it takes me to Avalaunch. If I want to ADD evox as a dash, how do I go about doing that?

forever1day · « **Reply #2 on:** July 13, 2004, 01:10:00 PM »

Thanks for a clear, concise and up-to-date tut, I appreciate it!

lookformeb · « **Reply #3 on:** July 13, 2004, 02:39:00 PM »

Pretty much got it covered. Thanks for documenting!

Freight Train · « **Reply #4 on:** July 14, 2004, 05:18:00 PM »

Guys, quick question. I'm completely new to modding, and I got this chip. Now, I installed it, solderless, and turned on my x-box... but it booted just as it always has. I'm completely clueless as to what to do past this, and i've been looking for about two hours on the net. ANY help would be beyond appreciated. I hope someone sees this...

tagler · « **Reply #5 on:** July 14, 2004, 10:54:00 PM »

for me it would do that if i dind't have the solderless adapter PUSHED DOWN REALLY HARD and i mean i had to really hold it down and then tighten the screw for it to finally work

make sure u have the right D0

i have to do it a few times, but eventlually worked...

good luck

marksu · « **Reply #6 on:** July 14, 2004, 11:07:00 PM »

Outrager · « **Reply #7 on:** July 15, 2004, 02:06:00 AM »

When I use the "Retail Kernal" (original MS bios) to boot in to play my Xbox Live games, would the LED be on the color you choose or off? If it's on does that still mean that the chip is off?

Freight Train · « **Reply #8 on:** July 15, 2004, 03:57:00 PM »

Thanks guys, I pushed it harder and it worked. Also, thanks for the great guide.

tagler · « **Reply #9 on:** July 15, 2004, 04:49:00 PM »

your welcome

Vejita · « **Reply #10 on:** July 15, 2004, 05:23:00 PM »

I didn't install the LED adaptor, I wanted everything to be "internal".

I installed the rivets in the first two holes in the LPT as mentioned in the official manual but that caused problems so I installed the Xenium without any rivets and it worked fine.

What use is there for the LED apart from it telling you the mod is operating ok?

tagler · « **Reply #11 on:** July 15, 2004, 10:47:00 PM »

the LEDs change colors for while bios u are using, but besdies looking cool they are meaningless

EVERYONE check this out. I just type of my first guide and a guy steals it and credits himself

check it out:

http://www.ozxodus.c...iewtopic&t=2493

people will never cease to amaze me

travanx · « **Reply #12 on:** July 15, 2004, 11:47:00 PM »

Thank you for this guide!! Just got my xenium ice today finally from modwhiz. Don't pick the slow shipping. =( Everything went smooth on the first try. Followed this guide and got all the stuff (bios) blah blah from the irc. i cant figure out how to boot with the m8 bios, but I got the executer bios working. Just tried to FTP the dashboard over, but not sure how to get that to work just yet. Thanks again for the guide.

Actually could you explain how you installed the Avalaunch dash? Still no clue why I can flash the evo m8 bios. At least the x-cuter works though.

tagler · « **Reply #13 on:** July 16, 2004, 12:28:00 PM »

i just downloaded the avalaunch files and then put them all in my C: drive and then renamed avalanch.xbe to evoxlaunch.xbe (or whatever the default name for evolutionX is)

you might want to re-download the M8 bios you coulnd't have a problem flashing them

tagler · « **Reply #14 on:** July 16, 2004, 12:44:00 PM »

http://www.ozxodus.c...iewtopic&t=2559

this jerk has posted my guide yet again.... the first tread he made was deleted so he makes anouther one.... great.....

Author Topic: Newbie Guide To Instaling Xenium Ice, Bios, Evox (Read 161 times)