Topic: Blue Led On Xenium And Frag (Read 68 times)

Rendell · « **on:** July 02, 2004, 03:18:00 AM »

All connections seem to be in perfect working order. Tested everything with multimeter, v1.4 board.

I used to have a red light on xeniu, and frag. This time its blue solid light and frag on xbox green/red.

Can anyone tell me what the blue LED light refers too. I've gathered alot of info on xenium but i cant find this answer amongst it. Thanks

marksu · « **Reply #1 on:** July 02, 2004, 05:56:00 AM »

Which install method are you using?
Quick install
Pine header
Solderless

robwoods · « **Reply #2 on:** July 02, 2004, 06:47:00 AM »

Did you install any bios? sorry but had to ask

archmage164 · « **Reply #3 on:** July 02, 2004, 01:25:00 PM »

yeah man, do you get to the xenium screen? whats goin on you gotta let us know. did you boot with the power button or eject?

Rendell · « **Reply #4 on:** July 02, 2004, 07:05:00 PM »

Thanks heaps for your replies.

V1.4 board.
Brand new box with nothing installed.
Installed xenium using pin header.
Checked all points with multimeter
All standard AV leads and controllers

When chip is in:
Doesnt matter which button i boot from i get blue light on chip and two reboots then frag. No screens at all come up during this process.

I have tried holding down the white button
Running the chip in recovery
Turning the chip around
Booting from both eject and power button
No software or any changes have been made since i cant get it to boot.

Without the chip it boots fine to MS dash.

marksu · « **Reply #5 on:** July 02, 2004, 10:10:00 PM »

1. Hmm if the recovery mode does not do a update OS then maybe you lost the OS completely and chip is useless.
That can happen if mod is a clone.

2. Chip can also be defected and you should then send it for warranty replacement

Rendell · « **Reply #6 on:** July 29, 2004, 06:03:00 AM »

Thanks Marksu ...

Just wanted you to know that i did send it back. The new one works fine.

Author Topic: Blue Led On Xenium And Frag (Read 68 times)