Topic: Xenium Not Working/has Been Wiorking Fine (Read 67 times)

getthefunstuff · « **on:** March 29, 2004, 02:40:00 PM »

i turned on my xbox and the xenium boots up, apperas to load (the data shows in the top left of the screen), then it stops and stays on the xenium www.ozxodus.com screen. wil someone out the kindness of their heart help me out?

EmperorPsiblade · « **Reply #1 on:** March 29, 2004, 02:50:00 PM »

getthefunstuff · « **Reply #2 on:** March 29, 2004, 02:53:00 PM »

xenium os 1.1

type s controller

it does not even go to the screen that allows me to go into the menu

getthefunstuff · « **Reply #3 on:** March 29, 2004, 02:59:00 PM »

i just followed the instructions in the xenium update manual to reload v1.1 os that i got from the ozxodus website. since the xenium chip would not boot to its menu so i could go into safe mode i started the xbox with the chip switched to safe mode. as the manual said, it should load the os then reboot. the screen says loading....got from cd but the xbox did not reboot

EmperorPsiblade · « **Reply #4 on:** March 29, 2004, 03:01:00 PM »

getthefunstuff · « **Reply #5 on:** March 29, 2004, 03:02:00 PM »

i turned the xbox off myself, pulled the chip and switched it back to normal mode and its still doing the same thing (the xenium boots up, apperas to load. the data shows in the top left of the screen, then it stops and stays on the xenium www.ozxodus.com screen).

getthefunstuff · « **Reply #6 on:** March 29, 2004, 03:05:00 PM »

i just unplugged every single wire on the xbox and then reattached them. nothing different.

EmperorPsiblade · « **Reply #7 on:** March 29, 2004, 03:10:00 PM »

hmmmmmm....lets see.... try booting it without a controller in... and remove any other devices like the dvd remote

PS: for some reason... it doesn't reboot automatically on some boxes but it did on mine

getthefunstuff · « **Reply #8 on:** March 29, 2004, 03:24:00 PM »

well it worked fine after that. did it just need to reboot all the ports?

strange! ive rebooted it 6 or 7 times to check that it is still working, works fine now. thank you i was about to throw the damn thing at the wall

EmperorPsiblade · « **Reply #9 on:** March 29, 2004, 03:25:00 PM »

how very odd....

getthefunstuff · « **Reply #10 on:** March 29, 2004, 03:36:00 PM »

just a little more info for anyone who has this problem in the future. my xbox is a v1.0, everything that was connected at the time of problem: samsung sdg-605 dvd drive, western digital caviar wd2500 250gb hard drive (not locked at the time), three s type controllers, ethernet cable, and of course a/v cable and power cable. i removed the xenium chip and tried out another chip, then reinstalled the xenium when the problem occured.

Author Topic: Xenium Not Working/has Been Wiorking Fine (Read 67 times)