xboxscene.org forums

Author Topic: Xenium Error Question  (Read 74 times)

arjkar

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Xenium Error Question
« on: March 16, 2004, 06:38:00 PM »
red light on xenium will stay until you enter the menu, it means you have power, so you don't need to install the 3.3.  How do you know your xbox is still on after all LEDs go away? is the fan running, etc.?  Check your LPC pts, because since you r booting to the xenium splash logo, your d0 is correct.  make sure u got pwr and gnd right.  any more info?
Logged

Mr Nobody

  • Archived User
  • Newbie
  • *
  • Posts: 34
Xenium Error Question
« Reply #1 on: March 17, 2004, 04:08:00 AM »
Do you get the screen with the controller showing?  Hold down the white button.
Logged

xFusioNx

  • Archived User
  • Full Member
  • *
  • Posts: 224
Xenium Error Question
« Reply #2 on: March 17, 2004, 12:35:00 PM »
I got it working thanks for all the help guys.

Turns out there was something wrong with my controllers. I used a blue s controller and a black one and neither worked. I went to an old school brick controller and it worked fine.

Now my  controllers work that I did an OS update.

Thanks for the support.
Logged

m0sphere

  • Archived User
  • Newbie
  • *
  • Posts: 1
Xenium Error Question
« Reply #3 on: March 26, 2004, 05:52:00 PM »
HLEPHLEPLHGPEWLSa AHhh hahah anyways..

Capture IS THAT WHAT WAS HAPPENING????

i installed the xenium with a solderless arm, then booted the xbox and i get that screen, its so blurry i cant read it though. if thats what you got please let me know, i'll go get my friends big ugly controller if thats the problem, i have the small black one and a small kinda seethrough blue one too. LET ME KNOW!@!#!
Logged