xboxscene.org forums

Author Topic: Problems Everywhere  (Read 96 times)

xboxhackcrack

  • Archived User
  • Jr. Member
  • *
  • Posts: 81
Problems Everywhere
« on: March 16, 2004, 12:43:00 PM »
blink.gif If it helps, I got a v 1.1 xbox
Logged

xboxhackcrack

  • Archived User
  • Jr. Member
  • *
  • Posts: 81
Problems Everywhere
« Reply #1 on: March 16, 2004, 01:29:00 PM »
ok I finally got it to work. LPC points were the problem. Now my only problem is flashing. Backed up my eeprom already though. When I try flashing evox I get the Bios not proporly sized.
Logged

arjkar

  • Archived User
  • Jr. Member
  • *
  • Posts: 53
Problems Everywhere
« Reply #2 on: March 16, 2004, 06:42:00 PM »
what he said^ and do u burn @ 1x and on 'never used' CDRWs, you should also add a large buffer file maybe 650mb if u got a 700mb disc.  These things may not make a difference but u can try them.  Also I heard Memorex 4x (again burned @ 1x speed though) works well? Do you know what drive or version your xbox is?
Logged

RxGuy

  • Archived User
  • Newbie
  • *
  • Posts: 1
Problems Everywhere
« Reply #3 on: March 16, 2004, 07:26:00 PM »
QUOTE
When I try flashing evox I get the Bios not proporly sized


I ran into this same problem tonight, but I found out that I all I needed to do was rename the file to BIOS.BIN.  My previous file had been something like EVOX_M7.BIN

Hope this helps
Logged

Jaego

  • Archived User
  • Newbie
  • *
  • Posts: 28
Problems Everywhere
« Reply #4 on: March 16, 2004, 08:11:00 PM »
QUOTE (RxGuy @ Mar 17 2004, 05:26 AM)
QUOTE
When I try flashing evox I get the Bios not proporly sized


I ran into this same problem tonight, but I found out that I all I needed to do was rename the file to BIOS.BIN.  My previous file had been something like EVOX_M7.BIN

Hope this helps

All 'official' bioses from the 'usual places' are all named bios.bin when extracted.  You shouldn't get your bioses from anywhere else!
Logged

xboxhackcrack

  • Archived User
  • Jr. Member
  • *
  • Posts: 81
Problems Everywhere
« Reply #5 on: March 17, 2004, 03:32:00 AM »
ok I dont have time now, but in the afternoon I will put the dummy file, default.xbe, evox.ini, and skins into the same folder. I will make it to an iso. I will rename the iso to BIOS.BIN. I will use nero burning ROM and burn the image to a fresh cd-rw slowest write speed it will let me use is 4x. Write method will be disk at once/96 and buffer underrun protection will be on.

Does this seem correct?
Logged

jordib

  • Archived User
  • Newbie
  • *
  • Posts: 6
Problems Everywhere
« Reply #6 on: March 17, 2004, 05:02:00 AM »
xboxhackcrack,
Be sure to read the "Creating a Bios CD Manual" on the Ozxodus site.  

As Mr Nobody stated, it sounds like you are trying to load a dash instead of a bios.  You have to load a proper bios before loading a dashboard.
Logged

xboxhackcrack

  • Archived User
  • Jr. Member
  • *
  • Posts: 81
Problems Everywhere
« Reply #7 on: March 17, 2004, 11:27:00 AM »
what is a name of a bios so I can actually figure out what I am looking for. Do I want to download OzXFlash 1.2.3 from the Xenium website?
Logged

jordib

  • Archived User
  • Newbie
  • *
  • Posts: 6
Problems Everywhere
« Reply #8 on: March 17, 2004, 03:58:00 PM »
Do not use OzXflash.  The Xenium has flashing capabilities built-in.  

The bios I used was named EvoxM7.bin, but this has to be renamed BIOS.BIN when you burn the CD.
Logged