Topic: Xenium Installed But Xbox Keeps Fragging. (Read 71 times)

MrPaulAR · « **on:** March 10, 2004, 09:42:00 AM »

Does anything at all come up on the TV? What happens if you hold down the white button upon boot?

ravage73 · « **Reply #1 on:** March 10, 2004, 09:53:00 AM »

yea, your do is not making a good contact.

Master-Chief · « **Reply #2 on:** March 10, 2004, 10:12:00 AM »

Does ur xenium OS boot when u press teh eject button?

bkc82 · « **Reply #3 on:** March 10, 2004, 01:48:00 PM »

if you put it on the adapter backwards and turned on your xbox then it would be a very bad thing. it could possibly burn up some of the parts on the chip. did you actually put it on there backwards?

EmperorPsiblade · « **Reply #4 on:** March 10, 2004, 01:50:00 PM »

the quick solder part should be near the MCPX if you did it right...

arjkar · « **Reply #5 on:** March 10, 2004, 04:20:00 PM »

maybe there's still hope?

once you got your lpc and d0 and chip positioned correctly, if it still frags try the recovery switch...?

sam1148 · « **Reply #6 on:** March 10, 2004, 06:35:00 PM »

I have the solderless adaptor, and gota quick question. I've looked at the docs for installing with the rivets. The pics aparently show a rivet in the D0 point, where the thin wire contacts the D0. But the Doc doesn't mention this step. I haven't cracked my box yet. But, dang that wire going from the adapter is tiny! Does a rivet go in the D0 point?

Evil Kaneval · « **Reply #7 on:** March 10, 2004, 09:28:00 PM »

Josh Adams · « **Reply #8 on:** March 11, 2004, 03:00:00 AM »

in my opinion the v1.0 motherboard is better off without the solder removed from the lpc, the spiked pogo pins make a great contact.

demitrix · « **Reply #9 on:** March 22, 2004, 06:22:00 PM »

i have the same problem. its all installed good. a friend told me a red LED was bad so i reseated teh chip and tried again now the LED is off totally but nothing boots D:

Author Topic: Xenium Installed But Xbox Keeps Fragging. (Read 71 times)