xboxscene.org forums

Author Topic: Replacement Pogo Pins For Solderless Adapter  (Read 38 times)

GUESS???

  • Archived User
  • Newbie
  • *
  • Posts: 1
Replacement Pogo Pins For Solderless Adapter
« on: March 10, 2004, 04:11:00 AM »
No bites, huh?

Guess I'm doing it the old fashion way.


Thanks anyway.
Logged

jimmykaraff

  • Archived User
  • Newbie
  • *
  • Posts: 8
Replacement Pogo Pins For Solderless Adapter
« Reply #1 on: March 10, 2004, 05:21:00 AM »
I've had this same problem before. Do you have the PIN HEADER that came with the chip? Pull out one of those pins. Clip 1/16 inch off. Place that pin in the chip and then place the chip on the mounted adapter. Check to see that you can push it down pretty much all the way for a solid fit. If not keep trimming a tiny bit at a time. If you cut it too short you won't be able to get it back out of the chip!

This worked GREAT for me. No problems at all. Although it was only 1 pin, so the rest held everything in place. It might not work if you have a few broke off.

Hope this helped. GOOD LUCK
Logged

Altima NEO

  • Archived User
  • Hero Member
  • *
  • Posts: 606
Replacement Pogo Pins For Solderless Adapter
« Reply #2 on: March 10, 2004, 08:50:00 AM »
Heh, I soldered my solderless adapter.
Little pins werent making full contact with the lpc holes. =/
Logged