Topic: Help - Xenium Flashes Red (Read 45 times)

nubert · « **on:** March 05, 2004, 10:53:00 AM »

Hi there

I am THAT friend and here's some more information -

I have a xbox version1.0 (old school)
And when I try booting up, the front flashes green briefly, shuts down, repeats that once again, and then the third time, I get FRAG until I turn it off. And all the while, the xenium LED is a solid red. Also, the hard drive beeps as it shuts down during the green flashes.

And ideas?

Thanks

indiggio · « **Reply #1 on:** March 06, 2004, 01:28:00 PM »

Help,

I'm in the same boat. I've check the PIN header and solders appear to be fine.

Is there anything else that can be checked? Any way to VERIFY the solders beyond visual?

arjkar · « **Reply #2 on:** March 06, 2004, 02:12:00 PM »

check the d0 point, use a multimeter on all points check for connection / bridging (between lpc points, and between soldered pts and motherboard)

erexx · « **Reply #3 on:** March 06, 2004, 05:39:00 PM »

Make sure all the cables are connected, including video.

LPC Trouble Shooting
http://www.xbox-scen...es/lpc-diag.php

Meanings of Red/Orange/Green flashing leds on Xbox.
http://www.xbox-scen...ticles/leds.php

Troubleshooting in general:
http://www.xbox-scen...0,0,0,0,0,0,0,1

Josh Adams · « **Reply #4 on:** March 06, 2004, 11:53:00 PM »

Don't worry about the d0 point as it will be fine. (Otherwise you wouldnt get a FRAG)

Resolder your LPC though.

Author Topic: Help - Xenium Flashes Red (Read 45 times)