Topic: Xenium + Wireless Controller (Read 51 times)

Humx · « **Reply #1 on:** February 27, 2004, 04:41:00 AM »

upgrade your Xenium OS to V1.1.
I know the Logitech always worked and the Wild Cat (or whatever) didn't.
OS V1.1 is supposed to allow allow IR controllers to work.

dzv · « **Reply #2 on:** February 27, 2004, 05:38:00 AM »

I use the Cosmo RF Wireless controllers with Xeniums, and they work fine. With OS v1.0 the XOS would sometimes hang on some Xboxes. But with v1.1 there seems to be no problem at all.

The BIOS you choose would make no difference in terms of a wireless controller.

QSilver7 · « **Reply #3 on:** February 27, 2004, 06:00:00 AM »

nba024 · « **Reply #4 on:** February 27, 2004, 07:36:00 AM »

Works fine with the pelican but must have v1.1 os for the xenium!

Evil_Elmo · « **Reply #5 on:** February 27, 2004, 08:48:00 AM »

I have a pair of the Logitech wireless controllers and neither works with my Xenium (1.1). The Xenium boots properly with only these 2 controllers attached, but I can't get into the Xenium OS with them.

oblox · « **Reply #6 on:** February 27, 2004, 08:58:00 AM »

Evil_Elmo · « **Reply #7 on:** February 28, 2004, 02:23:00 AM »

Did some more testing. Once I'm into Xenium OS the logitech controller works fine, but I require a wired controller to get into Xenium OS (unless instant/quick boot are off in which case it goes right in anyway). The Xenium isn't recognizing the white button from my logitech (either of them).

el_diablo · « **Reply #8 on:** February 28, 2004, 12:55:00 PM »

do u have both plugged in at the same time?
i read a post (cant remember who by) and he was complaining that it wouldnt boot with both of them in, had to plug in the second one once it was loaded

ColdBrew · « **Reply #9 on:** March 23, 2004, 05:13:00 PM »

got my Xenium today and you can't get in to the OS menu if all you have plugged in is the wireless Logitech. Hope they find a way to fix this in the future.

jordib · « **Reply #10 on:** March 24, 2004, 03:18:00 AM »

ColdBrew,
Have you upgraded to 1.1? Also, do you have more than one controller plugged in?

My Xenium boots fine with only one wireless Pelican Eclipse, but hangs with two. It also hangs with one Pelican and the DVD Dongle. It never gets past the Xenium boot screen.

ColdBrew · « **Reply #11 on:** March 24, 2004, 08:44:00 AM »

Only the wireless is plugged in. It doesn't hang like it did with OS 1.0, but you can't get in to the OS menu with only the wireless plugged in.

Author Topic: Xenium + Wireless Controller (Read 51 times)