xboxscene.org forums

Pages: [1] 2 3 ... 6

Author Topic: I Think I Fried My Xbox  (Read 288 times)

Mr Nobody

  • Archived User
  • Newbie
  • *
  • Posts: 34
I Think I Fried My Xbox
« on: February 04, 2004, 10:20:00 AM »

QUOTE
ORANGE Flashing:
This may also be down to a solder splash on the board or a damaged track. May also be due overheating.



Check for solder splash.
Logged

KlanXX

  • Archived User
  • Newbie
  • *
  • Posts: 12
I Think I Fried My Xbox
« Reply #1 on: February 04, 2004, 01:08:00 PM »

Whats the switch on the Xenium for?
Logged

Ranger72

  • Archived User
  • Hero Member
  • *
  • Posts: 3746
I Think I Fried My Xbox
« Reply #2 on: February 04, 2004, 02:24:00 PM »

May sound dumb but, after puting the mobo back in you did reconect the power wires right?
Logged

Ranger72

  • Archived User
  • Hero Member
  • *
  • Posts: 3746
I Think I Fried My Xbox
« Reply #3 on: February 04, 2004, 02:36:00 PM »

What version xbox you have?
Logged

HSDEMONZ

  • Archived User
  • Hero Member
  • *
  • Posts: 5248
I Think I Fried My Xbox
« Reply #4 on: February 04, 2004, 03:16:00 PM »

Well.. looks to me like you fucked up big time...


This is YOUR Pinheader...

user posted image

and this is a basic Pinheader install (no wires yet.. that is later.)

user posted image

Do you notice any difference?

HINT: Check the Pin header in relationship to the SCREW HOLE in both pictures.
Logged

NeO529

  • Archived User
  • Sr. Member
  • *
  • Posts: 281
I Think I Fried My Xbox
« Reply #5 on: February 04, 2004, 03:23:00 PM »

LOL smooth bro.
Logged

HSDEMONZ

  • Archived User
  • Hero Member
  • *
  • Posts: 5248
I Think I Fried My Xbox
« Reply #6 on: February 04, 2004, 03:30:00 PM »

Another HINT:

Your back..
user posted image

A properly done back..
user posted image

and another proper...
user posted image

(Pics courtest of Fuji)

Again.. the relationship of the position of the pinheader to the hole is KEY!
Logged

HSDEMONZ

  • Archived User
  • Hero Member
  • *
  • Posts: 5248
I Think I Fried My Xbox
« Reply #7 on: February 04, 2004, 03:41:00 PM »

Now let's take a look at the LPC.. and see what you've done... assuming you place the CHIP on the pinheader correctly.. despite the pinheader being in the WRONG place.

user posted image

Well..
...it looks like you were giving 5.0v to the chip on a pin that is supposed to be ground.. Pin 2 in Pin 6 hole.

... 3.3v goiing to the RST pin.

and 3.3v going to the LAD0 pin.

I'm not too shocked you are having problems with this setup. smile.gif



Logged

torhne

  • Archived User
  • Newbie
  • *
  • Posts: 18
I Think I Fried My Xbox
« Reply #8 on: February 04, 2004, 04:42:00 PM »

wow, i would have made sure that i knew eactly where everything went before i tryed anything like that  blink.gif
Logged

HSDEMONZ

  • Archived User
  • Hero Member
  • *
  • Posts: 5248
I Think I Fried My Xbox
« Reply #9 on: February 04, 2004, 05:16:00 PM »

What I want to see.. is the guide or tut KLAN was using that made him do that.
Logged

Puckster069

  • Archived User
  • Jr. Member
  • *
  • Posts: 74
I Think I Fried My Xbox
« Reply #10 on: February 04, 2004, 05:43:00 PM »

Holy shit dude! I don't want to sound like a dick... but jesus man even the worst TUT in existance still wouldnt have made you do that!  I was in utter disbelief when I seen those pictures.  Makes you take all the people bad mouthing whatever brand of chip they chose and hosed into perspective.  Well good luck to you KlanXX but you will be lucky if you didnt fry the chip let alone fuck up anthing else.

Peace!

PuckX   beerchug.gif
Logged

KlanXX

  • Archived User
  • Newbie
  • *
  • Posts: 12
I Think I Fried My Xbox
« Reply #11 on: February 04, 2004, 06:11:00 PM »

i resoldered everything the correct way, I guess I got a little carried away when I first started. but anyways i got everything resoldered and now i getting a red led on the chip and the eject button is flashing red/green. what does it mean.
Logged

HSDEMONZ

  • Archived User
  • Hero Member
  • *
  • Posts: 5248
I Think I Fried My Xbox
« Reply #12 on: February 04, 2004, 06:59:00 PM »

Show us some new pics showing us the FIXED situation...
Logged

shanafan

  • Archived User
  • Hero Member
  • *
  • Posts: 4097
I Think I Fried My Xbox
« Reply #13 on: February 04, 2004, 08:35:00 PM »

QUOTE (KlanXX @ Feb 5 2004, 12:23 AM)
ok here it is MY XBOX NOW ~still no working~

It's probably time to look for a new XBox motherboard.

Check XS Buy and Sell or eBay
Logged

JaggedChild04

  • Archived User
  • Jr. Member
  • *
  • Posts: 60
I Think I Fried My Xbox
« Reply #14 on: February 04, 2004, 08:38:00 PM »

omg.... sry dude but not only did u solder very badly. whats up with the screw hole and 2 wires badly soldered to it.... and mart of the rubber around the botton on one pic is melted.... have apro do a premod. i highly suggest www.system-mods.com and get an executer chip. for xeniums check out premods at houseofmodchips.com very cool guys at both websites. i dont buy from anywhere  else!
Logged
Pages: [1] 2 3 ... 6