xboxscene.org forums

Author Topic: Installation Troubles... No Startup Screen  (Read 82 times)

Strud1512

  • Archived User
  • Full Member
  • *
  • Posts: 207
Installation Troubles... No Startup Screen
« on: January 24, 2004, 06:31:00 PM »
More than likely a problem with one or more of your pinheader solder connections. Try carefully re-soldering them. This is the most common cause of FRAG (flashing read and green).
Logged

bugg

  • Archived User
  • Newbie
  • *
  • Posts: 6
Installation Troubles... No Startup Screen
« Reply #1 on: January 24, 2004, 09:25:00 PM »
1.3 with RCAs
Logged

notkevin

  • Archived User
  • Newbie
  • *
  • Posts: 37
Installation Troubles... No Startup Screen
« Reply #2 on: January 24, 2004, 11:10:00 PM »
Things you can try are check all your solder connections will a multimeter, make sure you are using RCA video connections ( I know it doesn't matter for older xboxes but might as well eliminate that as a possibility )  and make sure you have an original xbox controller plugged in when booting.
Logged