xboxscene.org forums

Author Topic: What I Dont Understand...  (Read 38 times)

Corspegrinder99

  • Archived User
  • Sr. Member
  • *
  • Posts: 426
What I Dont Understand...
« on: January 23, 2004, 12:34:00 PM »
how do you boot up a new dash thru the XeniumOS? and can you use SlaYerS auto-EvoX installer with an Xenium?
Logged

SigTom

  • Archived User
  • Hero Member
  • *
  • Posts: 643
What I Dont Understand...
« Reply #1 on: January 23, 2004, 12:43:00 PM »
I dont have a Xenium, but I would imagine that by flashing your chip with a BIOS that looks for evoxdash.xbe, avalaunch.xbe, mxm,xbe, xboxdash.xbe, etc, it would boot up to wahtever dash you have on the XBox.  And Im sure you can use slayers.  After the chip is installed and flashed, pop in slayers and it should boot up.
Logged

Strud1512

  • Archived User
  • Full Member
  • *
  • Posts: 207
What I Dont Understand...
« Reply #2 on: January 23, 2004, 02:11:00 PM »
QUOTE (Corspegrinder99 @ Jan 23 2004, 10:34 PM)
how do you boot up a new dash thru the XeniumOS? and can you use SlaYerS auto-EvoX installer with an Xenium?

The XeniumOS does not load the dash - the bios does that.
Just install your chosen bios(s) into the available banks on the Xenium (using the flash code in the XeniumOS). The bios you choose to start with will boot the dash, just like normal.

And yes, you can use Slayers. Remember, once you boot to your selected bios, everything is the same as with any other modchip.
Logged