xboxscene.org forums

Author Topic: D0 On Back  (Read 35 times)

resolost

  • Archived User
  • Newbie
  • *
  • Posts: 41
D0 On Back
« on: January 21, 2004, 06:09:00 PM »
on the back of the chip??? no i didnt notice it untill i had already done the other one....it was kinda funny cuz i thought i messed the thing up...
Logged

nachonut

  • Archived User
  • Full Member
  • *
  • Posts: 240
D0 On Back
« Reply #1 on: January 21, 2004, 10:15:00 PM »
I think Nitrideus is talking about the alt d0 point on the back of the mobo (bottom of the motherboard)

Yes you can use that. If you are unsure about your soldering skills on the top d0, go ahead and ot he bottom d0.  it is exaclty the same point and will do the same as the top.
Hope that answers your question.
Logged

Morglum

  • Archived User
  • Hero Member
  • *
  • Posts: 977
D0 On Back
« Reply #2 on: January 22, 2004, 05:19:00 AM »
dry.gif strange thing is my old chip worked, ive removed and cleaned up the LPC points, then resoldered the header pins back in, but it still frags. Fucking xenium POS  tongue.gif
Logged

shishtawoo

  • Archived User
  • Newbie
  • *
  • Posts: 10
D0 On Back
« Reply #3 on: November 14, 2004, 10:23:00 AM »
hey just prctice soldering small points on some old controller and use solder it makes soldering small points like that quick and easy
Logged

appleguru

  • Archived User
  • Hero Member
  • *
  • Posts: 1200
D0 On Back
« Reply #4 on: November 14, 2004, 11:35:00 AM »
wink.gif Download the 2.0.1 update from teamxodus.com, and either burn it, or with your other chip in, FTP the recovery.bin to E:. Then flip the recovery switch on the chip and let it flash the OS biggrin.gif
Logged