Topic: Led Flashes Red On Boot, No Xenium Os (Read 50 times)

olliegarcia · « **on:** January 21, 2004, 06:03:00 PM »

I have the exact same problem as you, in fact i posted about it at the exact same time lol
It does the same thing, flashes then goes out-- boots ms dash. I dont know where to start, all of my connections look good.

resolost · « **Reply #1 on:** January 21, 2004, 06:06:00 PM »

i have mine installed and i can get to the OS....i used the pinheader install....im not an expert so i cant give u any help except make sure that the soldering is correct

cameronsto · « **Reply #2 on:** January 21, 2004, 07:09:00 PM »

The first xbox I did with this chip I used the pin header and it worked fine.

-cameron

nikko_ · « **Reply #3 on:** January 22, 2004, 08:22:00 AM »

I have a v. 1.1 xbox with a similar problem
After installing the chip I tried the D0 on the front and all I get is a red light on the chip. So I switched the D0 to the back connection and now the xbox powers on and off twice and flashes orange and green then stays on and flashes green and red. The chip keeps flashing red. I get no video. I hope this helps.

Thanks for the help

Teke · « **Reply #4 on:** January 22, 2004, 09:36:00 AM »

Do you guys have it hooked up with component video? I had the same problem but switched to the rca cables and worked fine. Now all I have to do is figure out how to setup the flashing part.

cameronsto · « **Reply #5 on:** January 22, 2004, 09:57:00 AM »

QUOTE (Teke @ Jan 22 2004, 07:36 PM)

Do you guys have it hooked up with component video? I had the same problem but switched to the rca cables and worked fine. Now all I have to do is figure out how to setup the flashing part.

Nope, just using the regular a/v composite cable.

cameron

nikko_ · « **Reply #6 on:** January 22, 2004, 10:39:00 AM »

Ditto -- RCA cables

randman · « **Reply #7 on:** January 22, 2004, 03:30:00 PM »

I had the same problem using the solderless adapter from a working 1.0 box with a cameleon. I removed the chip from the header several times and even wiggled it and finally got it working. I think the pin connections in the juction block are too loose.

I have the same problem with video using an X2VGA adapter. Switched to RCA and it worked fine

unfeomateo · « **Reply #8 on:** January 22, 2004, 07:48:00 PM »

Im having the same problem. But the red light stays on for me

unfeomateo · « **Reply #9 on:** January 22, 2004, 10:07:00 PM »

Anyone het theres fixed?

cameronsto · « **Reply #10 on:** January 23, 2004, 04:17:00 AM »

Well my buddy fixed his problem. His plan was to go back in, remove all the solder he added, empty the lpc holes, and use the pin header. While in the process of doing this he noticed, a very tiny piece of metal laying across the contacts of one of the chips on the mod chip itself. He popped that off, attached with the pin header and everything works now. It seems the piece of metal came on the chip, because he tried to solder the strip off and it wouldn't melt so it was obviously not solder.

-cameron

whoopgas · « **Reply #11 on:** January 23, 2004, 06:02:00 AM »

QUOTE (cameronsto @ Jan 23 2004, 02:17 PM)

Well my buddy fixed his problem. His plan was to go back in, remove all the solder he added, empty the lpc holes, and use the pin header. While in the process of doing this he noticed, a very tiny piece of metal laying across the contacts of one of the chips on the mod chip itself. He popped that off, attached with the pin header and everything works now. It seems the piece of metal came on the chip, because he tried to solder the strip off and it wouldn't melt so it was obviously not solder.

-cameron

I'm about to do that my self. Quick-solder is a bitch.

Did he use a wick or a Solder Sucker? I'm about to go to the store, that's why I ask.

unfeomateo · « **Reply #12 on:** January 23, 2004, 02:35:00 PM »

Ive tried for hours to fix this problem...any ideas?

whoopgas · « **Reply #13 on:** January 23, 2004, 08:11:00 PM »

Oi, did any one have any trouble with the solder not melting? I have got one hole left and its not budging. I need to borrow a higher watt iron.

cameronsto · « **Reply #14 on:** January 24, 2004, 06:29:00 AM »

QUOTE (whoopgas @ Jan 24 2004, 06:11 AM)

Oi, did any one have any trouble with the solder not melting? I have got one hole left and its not budging. I need to borrow a higher watt iron.

I did, seemed like some holes were more difficult than others.

-cameron

Author Topic: Led Flashes Red On Boot, No Xenium Os (Read 50 times)