Topic: Installed Xecuter3ce And It Boots Like Chip Isnt There (Read 69 times)

SBEEZY · « **on:** February 14, 2010, 06:46:00 PM »

did u use the 1.6 lpc rebuild board?

paintballer82 · « **Reply #1 on:** February 15, 2010, 08:26:00 AM »

Yeah I did. I checked all of the connections on it to make sure that everything that was supposed to be connected was and that everything else wasnt.

pattythefatty · « **Reply #2 on:** February 15, 2010, 09:45:00 AM »

what happens when you boot to the back up bios by pressing eject and power at the same time?

paintballer82 · « **Reply #3 on:** February 16, 2010, 09:09:00 PM »

It still boots up like the chip isnt there.

Heimdall · « **Reply #4 on:** February 17, 2010, 12:38:00 AM »

Did you connect the separate 5v power lead? On a 1.6 you need to use an alternate 5v source for X2.6 and X3 - see this guide.

Also have a look at this small X3 troubleshooting FAQ.

typahl21 · « **Reply #5 on:** March 27, 2010, 10:24:00 PM »

I am having a similar problem. I have everything hooked in, the blue light comes on however the red / green light for the unprotected / protected does not come on.

I also seeem to be having trouble with my Hard drive. it is still the stock one, but when I boot it gives my error 7 (harrddrive timeout). I dont know if they are intertwined maybe i screwed something up soldering onto the HD LED, but any help on either would be nice. (btw before you start I did unplug and replug in the IDE cables).

one more question, how do i test to make sure that all my soldering jobs are establishing a connection?

Author Topic: Installed Xecuter3ce And It Boots Like Chip Isnt There (Read 69 times)