Topic: Flashing Red And Green After Installing Bios (Read 32 times)

xlordx · « **on:** August 18, 2007, 03:30:00 PM »

i think you flashed with old bios your box is a 1.6 now reflash 1.6 m8 bios by booting flashbios then flipping switch back over bad flash then reflash over that with 1.6 bios-g/l

theperfekt001 · « **Reply #1 on:** August 18, 2007, 07:20:00 PM »

If neither bank boots, you will have to hotswap it or buy an external programmer.

xlordx · « **Reply #2 on:** August 18, 2007, 07:22:00 PM »

you did not flash both banks did you? you should have made the m8 bios 512 now you have another bank which
is also 512 so just flash m8 1.6 bios to that bank just make sure your bios is 512 in size or it will frag.-g/l
also befor you reflash try getting 5035 bios config bios this is really a better bios because you can choose what dash order to boot and all kind of stuff.

boob1966 · « **Reply #3 on:** August 21, 2007, 01:26:00 PM »

hotswap or programmer
flash it with x2 5035 v16 plus bios

Author Topic: Flashing Red And Green After Installing Bios (Read 32 times)