Topic: Xecuter Ii Lite Switch Question (Read 61 times)

torenzicht · « **on:** December 29, 2002, 11:22:00 AM »

Sure enough, as soon as I post this I find the answer - I think.

Can someone please verify that the jumper on = flash protection enabled?

Thanks.

nufan · « **Reply #1 on:** December 29, 2002, 11:28:00 AM »

yep thats correct..

basically theres 3 jumper settings. FLASH PROTECTION, MOD ENABLED, and BIOS.
so jumper ON means that feature = ON

so jumper on for flash protection = FLASH PROTECTION ON (cant be flashed)
jumper on for mod enabled = MOD ENABLED (working mod chip)
and of course the bios one, on = v1.0xbox and off = v1.1xbox

GLK888 · « **Reply #2 on:** January 13, 2003, 12:33:00 AM »

BTW guys what is this switch for..
to enable XBOX live?

thanks

nufan · « **Reply #3 on:** January 13, 2003, 12:35:00 AM »

since xbox live bans anyone if it detects a mod chip, the mod chip needs to be turned OFF to use xbox live successfully, so a switch will allow you to turn off the mod chip externally instead of opening up and changing the jumper all the time.

avorkinn · « **Reply #4 on:** January 13, 2003, 05:31:00 AM »

NO, the jumper should be OUT to protect against Flashing, to Enable Flashing the jumper should be in.

atari · « **Reply #5 on:** January 14, 2003, 11:49:00 PM »

QUOTE

so jumper on for flash protection = FLASH PROTECTION ON (cant be flashed)

QUOTE

NO, the jumper should be OUT to protect against Flashing, to Enable Flashing the jumper should be in.

There seems to be a difference in opinion....can someone verify what the jumper setting is so you CAN and CAN NOT flash your X2 lite?

If you want Flash Protection to be on (so you can not flash your X2):

1) should the jumper be on
2) should the jumper be off

thanks

- atari

sush1a · « **Reply #6 on:** January 15, 2003, 02:34:00 AM »

ok final here, just tried it so u guys can stop arguing.

Flash Protect Jumper ON = Protection
(when do flashing from evox saids flash type unknown)

Flash Protect Jumper Off = No Protection
(Evox broke my X2lite's virginity & impregnate it with F boot blue bios)

atari · « **Reply #7 on:** January 15, 2003, 07:49:00 PM »

Thanks sush1a and nufan for your help.

Installing my X2 tonight.

Cheers

- atari

ForNeverEnding · « **Reply #8 on:** January 16, 2003, 01:11:00 AM »

jesus, why is this a question...switch the damn switch on and try to flash with a bios? if it works, then you nkow that the switch ENABLES flashing, if it doesn't it enables FLASH PROTECTION

Author Topic: Xecuter Ii Lite Switch Question (Read 61 times)