xboxscene.org forums

Author Topic: The Spider Chip  (Read 185 times)

dark0

  • Archived User
  • Jr. Member
  • *
  • Posts: 56
The Spider Chip
« on: March 04, 2006, 01:10:00 PM »
Spiderchips are a pain in the ass to set up, but once it's set (not without a headache) it works fine.
Logged

Arm1tage

  • Archived User
  • Newbie
  • *
  • Posts: 2
The Spider Chip
« Reply #1 on: March 05, 2006, 09:22:00 PM »
That depends on several factors...  As Dark0 said, they are a pain in the ass to setup. Mainly if you have an xbox where the vias are filled with laquer. I must say im not toally convinced with the sewing needle solution for removing that laquer. Over time the wires WILL Pop out, i guarantee it. Its good for a cheapmod, but personally i like my chameleon much better. I dont wanna say 256k is limiting, but i dont really like evox m8 bios. (havent tried the X2 4981 or whatever, read it wasnt that good with 1.6's. I have the X2 5032 on the 512k bank of my chameleon. Runs fantastic, coulndnt get avalaunch to run until I flashed this bios, still have m8 on my 256k bank, havent used it in months.) Read a few posts back about my flash problem, still not fixed... contacted divineo about a replacement.... reply: they dont sell this chip anymore? WTF? i bought them last week.  blink.gif

-Arm1tagej
Logged

nohbudi

  • Archived User
  • Newbie
  • *
  • Posts: 1
The Spider Chip
« Reply #2 on: March 17, 2006, 08:25:00 AM »
I ordered my GX through Mod-Chip.com last December. After much head pounding action, much spilt blood, a bottle of asprin and alot of solder, I gave up on that lump of shit and contacted Mod-chip.com... It was february at this point, much much later than the 1 month exchange policy, but Osterman is one awesome guy. He totally simpathized with me, I sent it back, and 3 days ago I got a Xenium ICE at no cost to me. Installation took me about 10 minutes... and for the love of god... It worked the first time. 10 minutes later I had it upgraded to XOS 2.3.1 (what the gold has on it) and now I just need time to find some bioses to load on to it...

21 thumbs up to Mod-Chip.com for going above and beyond the normal service contract to take care of their own.  beerchug.gif
Logged

barkeff

  • Archived User
  • Newbie
  • *
  • Posts: 5
The Spider Chip
« Reply #3 on: April 01, 2006, 08:08:00 PM »
I would definately say it's not a good chip to get if you've never installed one before(I hadn't).On the other hand ,it's a great way to see all the beautiful colors your power light can turn if you've never seen them(I hadn't,and it scared the shit out of me.)Thank God I ended up having a 1.2 Xbox and only had to use one wire.
Logged

Viva La Sam

  • Archived User
  • Newbie
  • *
  • Posts: 36
The Spider Chip
« Reply #4 on: April 11, 2006, 03:46:00 PM »
if you get one, dont use the solderless method, solder it. its saves you the headache. the solder method on all modchips is always easier. solderfree is horrible. i am going to solder mine in soon so i will tell you if it is good or not.
Logged

NeoDarkSaver

  • Archived User
  • Newbie
  • *
  • Posts: 21
The Spider Chip
« Reply #5 on: April 11, 2006, 09:33:00 PM »
Spiderchip is perfect. I've already modded 2 boxes with it.
It took me 15mins each to set up.
And it works fine with evox, xbmc, or avalaunch!
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
The Spider Chip
« Reply #6 on: April 12, 2006, 04:37:00 PM »
QUOTE
Spiderchip is perfect

The only time I heard a comment like that before was from a member of the Team.
Are You?
Logged