xboxscene.org forums

Author Topic: From Spider To Soft Mod?  (Read 130 times)

beutel

  • Archived User
  • Newbie
  • *
  • Posts: 27
From Spider To Soft Mod?
« on: January 21, 2006, 05:04:00 AM »
try to send it back !
divineo took mine back after i told them what kind off bullshit this chip is tongue.gif
and yes you can still softmod it just refer to the manuals in the softmode section in this forum
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
From Spider To Soft Mod?
« Reply #1 on: January 21, 2006, 09:12:00 AM »

I assume you get your chip from divineo ? try sending it back , i have spoken to them at lenght regarding the issues with these chips. There should be no problem returning the chip to them.

If you buy a game like Splinter cell and a Xbox Memory card you can install a softmod easily. Or do what i do and solder in a headerpin , ground d0 and plug a duox2 chip onto the headerpin. Boot AID 2.11 final and install a softmod to the hard drive and then remove my duox2 and remove the link from d0 to ground. Now the xbox is softmodded and if i ever have a problem i can just ground d0 and plug a duox2 ( or similar lpc modchip ) onto the headerpin and boot AID again. If you can't solder then you can even use a Solderless adaptor to make it solderless and painless !

HackDaBox !
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
From Spider To Soft Mod?
« Reply #2 on: January 21, 2006, 07:41:00 PM »

Yeah the spidergx will boot AID , and setup your hard drive. Make damn sure you lock the hard drive or it won't boot after you remove the chip.

HackDaBox !
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
From Spider To Soft Mod?
« Reply #3 on: January 24, 2006, 11:44:00 PM »

Hello there ...

Yes just send your faulty chip back and get a Xenium Spice or a X2.6 solderless and enjoy the difference !

HackDaBox !
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
From Spider To Soft Mod?
« Reply #4 on: January 27, 2006, 08:07:00 AM »

Are you using a V1.6 now ? if yes then thats why ... the spider has problems booting xbe's after the dashboard.

HackDaBox !
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
From Spider To Soft Mod?
« Reply #5 on: January 28, 2006, 10:49:00 PM »

Burn AID 2.11 final to a DVD-R ( not dvd+r , not dvd-rw ) at 1x or atleast the slowest possible speed. Use dvd decrypter to burn the iso image. It will boot to the menu then just install a softmod and then remove the spider. If anything ever goes wrong with your softmod just install the spider and use AID 2.11 again !

HackDaBox !
Logged