xboxscene.org forums

Author Topic: Need Hackabox!  (Read 80 times)

capn65

  • Archived User
  • Newbie
  • *
  • Posts: 2
Need Hackabox!
« on: January 06, 2006, 01:33:00 AM »
So, I have this damn chip installed correctly(6 LEDs when off, 5 when on) Switch plugged in(Power LED on, Flash LED on).

Here's the problem....Flashed bank 3 from web site with X2 5035, screen went through all the steps to >END.
Powered off, powered on. Straight to the same old SpiderOS screen. Changed dip switches down, up, up, up for bank 3 and set autoboot to bank 3. Powered off, powered on......same damn SpiderOS screen.....huh.

Burned a flash bios from cd on a CDR, I have a Phillips drive so worth a shot(don't have any cdr-w) >ERASE, >WRITE & VERIFY.......no end? Straight back to the BIOS FLASH menu......huh.

I am in the process of burning a DVD-R Flash Bios disc as I am writing this, but the frustration has set in and I am ready to throw this F--king thing against the wall before the disc is done. HOWEVER, $ is limited and I have some hours invested but am getiing to wits end.....PLEASE, CAN U HELP?

You seem to be THE MAN and have helped many, any suggestions?

capn65 (IMG:style_emoticons/default/grr.gif)
Logged

beutel

  • Archived User
  • Newbie
  • *
  • Posts: 27
Need Hackabox!
« Reply #1 on: January 06, 2006, 04:32:00 AM »
flash again vie webOS, only set dip 1 down and select auto boot bank3 in the webOS.
should work then.
Logged

capn65

  • Archived User
  • Newbie
  • *
  • Posts: 2
Need Hackabox!
« Reply #2 on: January 06, 2006, 07:22:00 PM »
Thanks, but I've tried that...several times..
But I do have a question, in HackDaBox's installation guide he mentioned putting the X2 .ini file in drive /E:....am I supposed to somehow burn this file to a cdr-w or dvdr and place it in the xbox dvd drive? Or am I mistaken?, I have not tried this. And if I am to do this  what is the proper procedure?

capn
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Need Hackabox!
« Reply #3 on: January 07, 2006, 02:16:00 AM »

The Spider GX is not a xbox modchip ...

It's a bloody nightmare !

Never have i seen sooo many issues with a modchip since the last spider ( Spiderchip V1.0 / V1.1 )

Since your bank 3 is already flashed then you just need to set your dip switches to either auto and set your autoboot to bank 3 or force it to boot from bank 3 with the switches !

Ofcourse you have tried both of these options many times and it doesn't work becuase you have a spider and nuthing works like it should !

Don't worry about the .ini file yet as that might help but only once you can boot the damn thing !

Try to force bank 3 to boot by setting your switches to ...

off , on ,off , on

thats down , up , down , up !

HackDaBox !

Logged