Well that means you have to do something which could damage the mainboard.
The little holes are filled with laquer... this has to be removed with a really small knife or something with a small sharp point.
but as hack says on his site :
====================================
Spider GX Motherboard Damage Prevention !
====================================
A number of people have have damaged the via's ( very small holes in the motherboard ) where the Spider GX's legs go in. Clearing the laquer from these holes is needed on some xbox's but you must take extreme care as damaging these holes will damage your motherboard and even without the Spider GX your xbox will not work !
The xbox motherboard is a multi layer board and by opening up those tiny holes you can cause a short in side ! You can't see the damage but you will notice the FRAG and you will be unable to fix this !
--
So be carefull and don't do it if you don't think you can..
Gr
Henk
Author
Topic: Spider Chip With V1.6 Xbox (Read 90 times)