Print

[xNuke]

The D0 led should NOT be on when you turn the switch on, so you are correct.

Check out this guide made by HackDaBox,

http://www.hackdabox.com/SpiderGX.html

As far as the fragging goes, I'm going to tell you to make sure the chip is sitting correctly in the LPC holes, unscrew it a little bit and shift it a little left or right. You may want to consider HackDaBox's aluminum foil balls as well.

[Necrosaro420]

QUOTE(xNuke @ Dec 27 2005, 07:27 AM)

The D0 led should NOT be on when you turn the switch on, so you are correct.

Check out this guide made by HackDaBox,

http://www.hackdabox.com/SpiderGX.html

As far as the fragging goes, I'm going to tell you to make sure the chip is sitting correctly in the LPC holes, unscrew it a little bit and shift it a little left or right. You may want to consider HackDaBox's aluminum foil balls as well.

I used hacks guide, but it still did not work.  I did the aluminum foil trick as well, and still no go =(  Move the chip around, reboot, million times.   3 reboots and nothing on screen.

[henksteenwijk]

Beginning to look like you have a faulty chip