xboxscene.org forums

Pages: 1 ... 4 5 [6] 7

Author Topic: Spider Gx Functionality  (Read 2487 times)

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Spider Gx Functionality
« Reply #75 on: November 18, 2005, 05:43:00 AM »


Strange ... the evox m8 plus V1.6 bios boots for you , sounds like you are not getting a good connection to pin one on the spider gx to the lpc !

Your D0 is working ! yes one light will go out when the chip is installed correctly and powered on !

Dont worry what the silly spider GX OS says you know you have a V1.6 ! it's not clever enough to know what version you have !
 
HackDaBox !
Logged

sebaliseb

  • Archived User
  • Newbie
  • *
  • Posts: 7
Spider Gx Functionality
« Reply #76 on: November 18, 2005, 07:40:00 PM »

I can't believe anyone displaying or mentionning spiderchip or spidergxchip as something else than a whole crap.

The story is the following:

Spiderchip was a disaster.
Chip not working, Xbox dead, programmer took up to 16 hours to destroy the chip or work 1 time out of 10.
Some may ask... why ? wtf ?

Simple, behind Spiderchip you have 2 kids, one is 20 while the other is 18.
They stolen/used hacked code from aladdin for IC programming.
and stolen idea of solderless from xenium.
and they guessed they had an idea wink.gif...

After the nightmare/disaster.
they come up with another shit that is using a public open bios as well as the 2 previous stolen ideas and code.

They presented themself as a different team from spider1 but still posted that on the same web site (if you didn't change your mind at this point, please check your doctor)

Their new spiderchips weren't sold anywhere cause nobody wanted to sold a such crap chip due to bad experience. Except of course Divineo, who didn't care at all about what kind of crap they are selling until they make some $$$. For your reference divineo owner never installed any single chip in his life, not even on PS1

it's the worst of the worst modchip , the name modchip isn't even suitable for such device.

If xbox-scene could not make a difference between something that work and a crap product, i guess they should make a polls with all chips listed, and let installers, users, visitors able to mention which one is the worst chip for xbox.

I guarantee that over 95% will go for spider chip, so may be they will understand that those kiddies didn't deserve any thing, no credit, no thanx, no forums.
Just IGNORE them and their products.
They destroyed enough Xbox that people bought with their hardly earned money. a "SCENE" could not let such product spreading around.

It's a really serious warning, some spider1 owners get their xbox destroyed immediately or weeks later.

I made my scene job by warning you about the SERIOUS risks you 're taking by modding your xbox with a chip that is everything you want, but not a modchip.

I will not enter any further details, like no emails answers from them about spiderGX as they were doing the same for spider1, and it's the same for every points they promised to be different in their flagrant lie when they were saying it's a different team.

That lie itself justify a whole scene boycott of their products, claiming to be a different team in order to not assume a minimal customer service as it was simply impossible due to the defective rates of their products. But still wanted to "scam" some others at the same time... Who can accept such practice ?


GET RID OF THIS grr.gif
Logged

orlandu

  • Archived User
  • Newbie
  • *
  • Posts: 11
Spider Gx Functionality
« Reply #77 on: November 19, 2005, 01:48:00 PM »

QUOTE(HackDaBox @ Nov 18 2005, 12:14 PM)
Strange ... the evox m8 plus V1.6 bios boots for you , sounds like you are not getting a good connection to pin one on the spider gx to the lpc !

Your D0 is working ! yes one light will go out when the chip is installed correctly and powered on !

Dont worry what the silly spider GX OS says you know you have a V1.6 ! it's not clever enough to know what version you have !
 
HackDaBox !
*



Thanks for the reply, it's good to know that LED isn't an indicator of a problem! I've tried repositioning the pogo pins on the LPC and it doesn't seem to make any difference (well, if I move them out of position, the box FRAGs on boot, with them in what I assume is the right position it behaves exactly as I described before). I'm not sure what else I could do to make a better connection, other than soldering (which would kind of defeat the point of this chip!).

When I boot the Xbox with the chip enabled, should I see the flubber animation? And if I reboot, should I see it then?
Logged

pirate-linux

  • Archived User
  • Newbie
  • *
  • Posts: 12
Spider Gx Functionality
« Reply #78 on: November 19, 2005, 02:29:00 PM »

what is bank1, bank2, bank3, auto and how do i switch between them
Logged

chronotrigger681

  • Archived User
  • Full Member
  • *
  • Posts: 232
Spider Gx Functionality
« Reply #79 on: November 20, 2005, 02:06:00 AM »

muhaha.gif  i friggin hate spider chips if u r reading this DO NOT BUY ONE! i got a spidergx just put it in my 1.6 i finally got it installed correctally (all led's lighting up) then the chip loaded and did a few things....i dont have a m$ controller right now didnt know i needed one till...(thanks x-scene) but i couldnt do nothing so i turned the chip off now my xbox frags UNLESS I HAVE THE CHIP ON...i took the chip out completely still frags and tells me i need to contact customer service....did i fuck up my xbox or do i just need to get a controller and install some software??? please help me before i drown myself in the toilet for buying this chip???????? THANX IN ADVANCE!!
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Spider Gx Functionality
« Reply #80 on: November 20, 2005, 04:45:00 AM »


Since it doesn't work with the chip out you may have done some damage to the via's when you were trying to force the legs in !

Install the chip again and grab a a mates controller and flash your bios and setup auto booting of a hacked bios then you can give them their controller back and your controller wil work fine with a hacked bios and dashboard.

HackDaBox !
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Spider Gx Functionality
« Reply #81 on: November 20, 2005, 04:55:00 AM »

QUOTE(pirate-linux @ Nov 20 2005, 08:00 AM)
what is bank1, bank2, bank3, auto and how do i switch between them
*



You really need to read the manual at www.spidergx.com !

HackDaBox !

Logged

sickzombie420666

  • Archived User
  • Newbie
  • *
  • Posts: 6
Spider Gx Functionality
« Reply #82 on: November 20, 2005, 12:58:00 PM »

QUOTE(chronotrigger681 @ Nov 20 2005, 03:13 AM)
muhaha.gif  i friggin hate spider chips if u r reading this DO NOT BUY ONE! i got a spidergx just put it in my 1.6 i finally got it installed correctally (all led's lighting up) then the chip loaded and did a few things....i dont have a m$ controller right now didnt know i needed one till...(thanks x-scene) but i couldnt do nothing so i turned the chip off now my xbox frags UNLESS I HAVE THE CHIP ON...i took the chip out completely still frags and tells me i need to contact customer service....did i fuck up my xbox or do i just need to get a controller and install some software??? please help me before i drown myself in the toilet for buying this chip???????? THANX IN ADVANCE!!
*




hey i have found that mad cats controllers work and yes this chip sucks pretty damn bad a pain in the ass to install one thing ppl need to remember when installing these chip is that puting to much pressher on the chip and damage your lpc port or brake off some of those lil dieods next to the lpc port and 2 when screwing the chip down if you dont watch your tention you will strip out the screw hole and then its just even more of a pian in the ass to install and i have found sometimes the chip has grounding problems and one way to fix the is to take a wire like 6 inchs long strip it at both ends about in inch then use one end to wrap around the screw and one around the metal caseing
Logged

chronotrigger681

  • Archived User
  • Full Member
  • *
  • Posts: 232
Spider Gx Functionality
« Reply #83 on: November 20, 2005, 04:38:00 PM »

jester.gif i must give props to hackdabox your all over these forums gotta tell ya you have alot of patience got my box back and running thanks to a little help from this site!!!
                                                THANK YOU
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Spider Gx Functionality
« Reply #84 on: November 21, 2005, 05:22:00 AM »

QUOTE(chronotrigger681 @ Nov 21 2005, 10:45 AM)
jester.gif i must give props to hackdabox your all over these forums gotta tell ya you have alot of patience got my box back and running thanks to a little help from this site!!!
                                                THANK YOU
*



Thanks !!!

Glad to hear you got it going !

HackDaBox !

Logged

grifferoo85

  • Archived User
  • Newbie
  • *
  • Posts: 1
Spider Gx Functionality
« Reply #85 on: November 21, 2005, 05:05:00 PM »

I have the same problem as Orlandu except for I can't load evox bioses at all.  The only ones that will work is the x2 5035 and x2 5032 bioses.  I can install evox fine with slayers auto installer but when I go into the dashboard I can't load any of the apps.  I thought maybe it just wasn't making a good connection so I did a squeeze method on it and it seems to have good connection but it still won't work.  Would this be a bios problem, a hardware problem, or a dashboard problem?  Anyone know?  I can play burnt games but thats about it.  Someone plz help.
Logged

chronotrigger681

  • Archived User
  • Full Member
  • *
  • Posts: 232
Spider Gx Functionality
« Reply #86 on: November 22, 2005, 03:22:00 AM »

muhaha.gif  ok help me out here am i just stupid or am i??I have a spidergx in my 1.6 if i turn the chip on and unlock my hard drive then turn the chip off then turn my box on my box frags.then if i turn the chip on and lock my hard drive then turn off the chip and the box on it works fine???odd???also im workin on installing my bios but all i have right now is these pooper memorex cr-r's sad.gif ive hit every damn problem possible so far modding my box...last thing i know where to find emulators for my box but where do i find my roms???also will i need to make dummy files with my bios on my bios disc??any thing eles u think my ass may need to know (other than to snort lines of ajax 4 buying this chip) please tell me!!mail me please with that location [email protected] thanks again
Logged

hazpha

  • Archived User
  • Newbie
  • *
  • Posts: 20
Spider Gx Functionality
« Reply #87 on: November 22, 2005, 07:32:00 PM »

QUOTE(grifferoo85 @ Nov 22 2005, 09:36 AM)
I have the same problem as Orlandu except for I can't load evox bioses at all.  The only ones that will work is the x2 5035 and x2 5032 bioses.  I can install evox fine with slayers auto installer but when I go into the dashboard I can't load any of the apps.  I thought maybe it just wasn't making a good connection so I did a squeeze method on it and it seems to have good connection but it still won't work.  Would this be a bios problem, a hardware problem, or a dashboard problem?  Anyone know?  I can play burnt games but thats about it.  Someone plz help.
*



This is the same for me. I could install everything- New Hdd, flash bios with x2 5035 and installed evox and everything. But, I can't run any apps or boot any games. It just freezes up on the evox loading screen. It would be good if i could fix this problem. Cos then i'd have it all working.
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Spider Gx Functionality
« Reply #88 on: November 24, 2005, 06:52:00 AM »

QUOTE(grifferoo85 @ Nov 22 2005, 10:36 AM)
I have the same problem as Orlandu except for I can't load evox bioses at all.  The only ones that will work is the x2 5035 and x2 5032 bioses.  I can install evox fine with slayers auto installer but when I go into the dashboard I can't load any of the apps.  I thought maybe it just wasn't making a good connection so I did a squeeze method on it and it seems to have good connection but it still won't work.  Would this be a bios problem, a hardware problem, or a dashboard problem?  Anyone know?  I can play burnt games but thats about it.  Someone plz help.
*



Loosen your screw a little on your spider then use a squeeze guide ...

Squeeze Guide !

if you are allready using a squeeze guide add more pressure to it !

HackDaBox !

Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Spider Gx Functionality
« Reply #89 on: November 24, 2005, 06:54:00 AM »

QUOTE(hazpha @ Nov 23 2005, 01:03 PM)
This is the same for me. I could install everything- New Hdd, flash bios with x2 5035 and installed evox and everything. But, I can't run any apps or boot any games. It just freezes up on the evox loading screen. It would be good if i could fix this problem. Cos then i'd have it all working.
*



See above post !

HackDaBox !

PS maybe thats why the X2 bios works for you and the Evox doesn't ... maybe evox requires all the lpc pins conected and the X2 will boot without one !
Logged
Pages: 1 ... 4 5 [6] 7