xboxscene.org forums

Author Topic: Duox2 .... Bad Flash  (Read 372 times)

45thAssassin

  • Archived User
  • Newbie
  • *
  • Posts: 49
Duox2 .... Bad Flash
« on: August 01, 2011, 05:34:00 PM »
I'm new to flashing the duox2 chip (I've really only used xecuter 2 and 3 versions....)

anyways, I flashed the chip in the evox menu (3935)... to some sort of evox bios---SUCCESS
then reflashed the chip with some sort of xecuter 2 bios---SUCCESS AGAIN!


AND.... I'm doing this all without any knowledge as to what bios does what, for what (I know, smart idea)

and then I think I flashed the flashbios (3.03) on the wrong bank possibly.... I rebooted the xbox and the 3.03 flashbios screen does load....I scrolled down to the "flash bios from hdd" option... and then the xbox kind of just died....  sad.gif   my hdd, was unlocked and has no version of ms dash on it... so when I boot without chip, I get an error for not having a dash and it being unlocked.... when I boot with the chip, it just powers on for a split second and shuts off.....

The chip has worked for 3 months with absolutely NO problems and was soldered by a pro (no it wasn't me, like I said... it was done by a pro)



SO.... I'm wondering if any of my fellow modders on x-s have run into this problem and how did they possibly solve it... I'm also open to any untried suggestions (if all else fails, I may make some demo video on youtube on how to torch, shoot, cut, and launch the friggin' mobo  smile.gif  nah, just kidding!
Logged

Heimdall

  • Archived User
  • Hero Member
  • *
  • Posts: 3862
Duox2 .... Bad Flash
« Reply #1 on: August 01, 2011, 05:58:00 PM »
Try the other bank on the chip, see which BIOS is on there.
Logged

45thAssassin

  • Archived User
  • Newbie
  • *
  • Posts: 49
Duox2 .... Bad Flash
« Reply #2 on: August 01, 2011, 06:11:00 PM »
man, heimdall..... you are like a hawk, you reply within minutes!

anyways, I will give it a go.... I also realized if all else fails, I can get a new duox2 chip and just swap it out (but  I'd rather try to fix this one first)

I tried the other bank.... I'm confronted with "XBOX Linux Cromwell BIOS 2.40"

and option to flash with network or cd-----I'm going to try the cd, but am reluctant and would like somebody to possibly recommend a safe DuoX2 bios! I'm sure I already have it... just name it and I'll give the flash a try!


Logged

Heimdall

  • Archived User
  • Hero Member
  • *
  • Posts: 3862
Duox2 .... Bad Flash
« Reply #3 on: August 01, 2011, 06:21:00 PM »
Use X2.5035. Make sure you get the right version for your Xbox - the 1.0-1.5 version is not the same as the 1.6 version.

I'd use the network to flash. Boot with Cromwell, then switch back to the other bank before you flash, that way you won't overwrite Cromwell.
Logged

45thAssassin

  • Archived User
  • Newbie
  • *
  • Posts: 49
Duox2 .... Bad Flash
« Reply #4 on: August 03, 2011, 07:00:00 AM »
sorry to respond late...  wink.gif anyways, I did sort everything out!

I have a v1.0 xbox and did try to establish a network connection, and for some reason it wouldn't work (definitely not my first time flashing through the network, but first time it didn't work).... after some quick research online, I realized some *bugs* are persistent in v1.0 xbox consoles with the combination of the DuoX2 chip and Cromwell flashbios....including not being able to establish a connection in cromwell flashbios option... so I did have to resort to the dvd/cd flash method.... first time I've done it, and it wasn't all that difficult... just went through about 15 old dvd's  to finally get the right type to finally work....and SUCCESS!

thanks for the help heimdall!
Logged