Topic: Duox2 Gs White Bad Flash. (Read 100 times)

litspliff · « **on:** June 15, 2008, 07:55:00 PM »

LOL...yeah, that can happen!

you can try the hotswap (which i've never gotten to work myself)

or, i can hook you up with another chip for 13$ shipped....

http://forums.xbox-s...howtopic=648595

sajfen · « **Reply #1 on:** June 17, 2008, 04:59:00 PM »

QUOTE(mario_ps2 @ Jun 18 2008, 01:27 AM)

If you have another modded xbox, boot it up, take out the duox (needs to be on a pin header) put the non-working duox and flash the soccer. I've done it before and I know it works.

Oh that sounds interesting. I do have another xbox and another duox2 gs. Do you have any more information on how that operation is performed ?

sajfen · « **Reply #2 on:** June 18, 2008, 02:03:00 PM »

Maybe in the sticky .... sorry =)

But you need some quick swap double header thingy then right? It's not like you want to resolder the one that came with the chip while your xbox is still on.

sajfen · « **Reply #3 on:** June 19, 2008, 12:42:00 PM »

Omg the one that came with the chip IS a hot swap DIL socket connector thingy! Just never yanked it hard enough

.

litspliff · « **Reply #4 on:** June 19, 2008, 02:27:00 PM »

let me know if you get the hotswap to work.

i've tried it a couple times with no success.

you must ground your D0 to the screw by the LPC (not the D0 on the chip).

also, make sure you jump your BT on the chip.

then you can slide the chip off during operation and replace with the target chip.

if it happens correctly, the chip should light up (blinking red) and be flashable.

when i do it, the chip doesn't light up, and attempting to flash just returns an error message.

not sure what i'm doing wrong, but i've heard a few success stories.

good luck dude!

Chancer · « **Reply #5 on:** June 19, 2008, 03:45:00 PM »

Should work fine. I have even hot swapped different chips. Good luck.

litspliff · « **Reply #6 on:** June 27, 2008, 10:52:00 PM »

your results are similar to mine...

i can't even get it to light up.

i've tried on a couple different versions...oh well..

wwwavatar · « **Reply #7 on:** June 28, 2008, 09:37:00 AM »

i have read that you can use an aladin programmer to redo the duox's.

atm im having a hard time finding an aladin programmer... i have 3 duoxs that need reflashed.

im also on the look out for diy programmer plans...

run088 · « **Reply #8 on:** June 28, 2008, 01:07:00 PM »

This does work I have done it many times.There is a tut by hackdabox and Chancer around here that explains in detail how to do it.I always use the slayers method and I have never had a problem.
Here is a link...

http://forums.xbox-s...howtopic=390508

Chancer · « **Reply #9 on:** June 28, 2008, 01:36:00 PM »

QUOTE(wwwavatar @ Jun 28 2008, 05:13 PM)

i have read that you can use an aladin programmer to redo the duox's.

atm im having a hard time finding an aladin programmer... i have 3 duoxs that need reflashed.

im also on the look out for diy programmer plans...

The Aladdin programmer will not flash the DuoX 2. In fact none will that I have ever tried.
Hotswap has never failed me. link pin 9 to BT on the chip and ground Xbox D0
Boot the box. I usually use Eurasia as the flash app and hot swap the chip when the tray opens asking for the bios disc.

litspliff · « **Reply #10 on:** June 30, 2008, 07:24:00 AM »

has anyone had any experience hotswapping with evox?

this is what i use, and it just goes all kinds of wrong.

wwwavatar · « **Reply #11 on:** July 14, 2008, 04:08:00 PM »

crap,

this is the first i have read of an aladdin programmer not working on duox2's.. i have been looking for a couple months for a programmer.

crap crap crap.

i have 3 or 4 duox's that need reflashed, and no box to swap them in...

way back when, i hot swapped x2 chips, that worked well...

grr

Author Topic: Duox2 Gs White Bad Flash. (Read 100 times)