Topic: Can A Bad Chip Cause Red/green Lights? (Read 65 times)

litspliff · « **on:** April 01, 2008, 01:17:00 AM »

error 41? i think that means you're out of beer.

is the red light on the duo chip flashing when you power on the box with D0 hooked up.

even if you get a 3-boot FRAG, the red light on the chip should come on brielfy.

it sounds like the install went bad, but try and rule everything else out.

electricd7 · « **Reply #1 on:** April 02, 2008, 07:40:00 AM »

UPDATE:

Used my multimeter on the top D0 point and the bottom where I connected to what I *thought* was the alternate D0 on a 1.4, and the 2 points were not connected! I quickly soldered a wire to the top D0 point and grounded it, and voila, the thing works! Can anyone point me to the alternat D0 point on a 1.4 board, as I just don't trust my solder job on the tiny top one. Thanks!

ED7

Chancer · « **Reply #2 on:** April 03, 2008, 04:14:00 AM »

litspliff · « **Reply #3 on:** April 03, 2008, 05:15:00 PM »

glad you got it.

if you need any more cromwell chips....

http://forums.xbox-s...howtopic=640645

Author Topic: Can A Bad Chip Cause Red/green Lights? (Read 65 times)