xboxscene.org forums

Author Topic: V1.6 Box Lpc Pain  (Read 52 times)

OrisonSeven

  • Archived User
  • Newbie
  • *
  • Posts: 6
V1.6 Box Lpc Pain
« on: February 04, 2008, 08:48:00 PM »
Ok, here are some pictures of the board.
IPB Image

IPB Image
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
V1.6 Box Lpc Pain
« Reply #1 on: February 05, 2008, 06:37:00 AM »
The burn mark on the top of the board near the top of the rebuild board and the fact that all the LPC connections have peaked solder tips tells me your soldering iron is not hot/powerful enough. The solder is not correctly molten or flowed if it pulls peaks in the solder when withdrawing the iron, or causes a burn on the board due to having to hold the iron on the work piece too long.
Daft as it may sound more powerful irons (hotter tip temp) cause less burning and damage than underpowered irons.
The solution is the connections (all of them) need reflowing with a hotter airon so they have an even appearance and no peaks.
There are 2 solder splashes evident in the pictures as well.
Logged

OrisonSeven

  • Archived User
  • Newbie
  • *
  • Posts: 6
V1.6 Box Lpc Pain
« Reply #2 on: February 05, 2008, 12:49:00 PM »
Ok, to finalize, I got a hotter iron... and now it works perfectly.  Thanks Chancer, wouldnt have tried that for a while.
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
V1.6 Box Lpc Pain
« Reply #3 on: February 06, 2008, 06:25:00 AM »
Glad it is all working for you pop.gif
Logged