Topic: Duox Gs 2 The White One (Read 111 times)

kadimkris · « **on:** August 07, 2007, 10:54:00 PM »

i got the doux gs 2 white ..... i got it all installed and it and when it powers on. it comes on the chip blinks 2 times and then it restarts and then it blinks 2 times and restart and then the unit stays on the light on the chip sold red and my eject button is blinking blue. yes blue i bought this box and it had blue leds and controler leds that are blue. i dont know what color it should be blinking.

so what it does is one and restart 2times then it stays onbut the eject button blinks.

if i undo the D0 from the chip the system works fine .

can any one help me?

scott85213 · « **Reply #1 on:** August 07, 2007, 11:31:00 PM »

Recheck all of your solder points, including the lpc and ESPECIALLY the d0 point.

kadimkris · « **Reply #2 on:** August 08, 2007, 02:45:00 PM »

QUOTE(scott85213 @ Aug 8 2007, 06:31 AM)

Recheck all of your solder points, including the lpc and ESPECIALLY the d0 point.

i redone all the points but the D0 cause its one he11 of a point to get the solder to stick on. any ways it must of been a bad connection(s) cause it works now.

i cant flash cause my cheap controller's dont work any clue how to fix?

scott85213 · « **Reply #3 on:** August 08, 2007, 05:44:00 PM »

If it's the right version you can do it through http, look around for info.

Alex548 · « **Reply #4 on:** August 08, 2007, 06:58:00 PM »

QUOTE

i cant flash cause my cheap controller's dont work any clue how to fix?

Use a genuine M$ controller. Some aftermarket controllers work also, but you may have to plug and unplug them a couple times while on the FlahsBIOS screen to get them working.

Author Topic: Duox Gs 2 The White One (Read 111 times)