Topic: Will This Work? (Read 105 times)

clinkermaker · « **on:** November 17, 2006, 12:51:00 PM »

okay, I have a duox 2 GS White on my workbench. I have a solderless adapter on the way.
I need to put new HDD in 3 xboxes that i dont have the eeprom for.
So here's my question.
Can I use the solderless adapter to put the chip in 1 box and add a new hdd, then lock the hdd to the motherboard. Then remove the chip and do the same to the other 2 boxes?

Chancer · « **Reply #1 on:** November 17, 2006, 03:56:00 PM »

yes you can but you will need to link BT to Pin 9 on the chip (Gs chips mainly will boot with BT to nothing but play safe) You also need to know that you will need a connection from whichever pin on the solderless routes D0 to the chip (Pin 4 usually). So you will need to connect for example pin 4 to D0 on the chip.
You can then stick the chip in any box fit the new HDD lock it and move to the next.
You will obviously need to flash the chip first and use an autoinstaller to put files on and format the drives.

clinkermaker · « **Reply #2 on:** November 17, 2006, 04:47:00 PM »

Well I've never chipped an xbox before.
I know how to solder, but never chipped, I've always used exploits.
So is there a diagram somewhere that will show me what I have to solder to get this to work?
I don't know what BT means or anything like that. I know I can probably find pieces of this here and there but I would rather have someone point me in the direction of the absolute correct way to do this if you would be so kind.
Thanks!

edit

Oh yeah I also wanted to add that I ordered the Universal Solderless Adapter and the chip seperately. And Divineo didn't send me any wires with my chip. What do I need to buy for wires?

clinkermaker · « **Reply #3 on:** November 17, 2006, 10:49:00 PM »

Hey, I don't want to ask this again because it was a question that was part of another post earlier, but I need to know tonight.
What kind of wire do I need for my Duox 2 GS?
I need to know tonight because I'm at work and we have lots of electrical supplies and my boss gave me the ok to take a few pieces.
Thanks if anyone knows.
BTW I have no Idea about types of wire, so please explain thorough if possible.

Alex548 · « **Reply #4 on:** November 17, 2006, 11:11:00 PM »

30 gauge kynar wrapping wire.

It has a solid copper core (not stranded wire).

Here's a link to the product. It's only $3.99
Click Me

clinkermaker · « **Reply #5 on:** November 17, 2006, 11:28:00 PM »

well we have 30 gauge copper wire here.
is that fine?
I would rather not purchase it from the net if possible, I have way too many things im bying on the net right now, and I dont want to lose track of all the stuff.

edit

Sorry I just clicked the link and see that its at radioshack. I can pick that up right down the road!

clinkermaker · « **Reply #6 on:** November 18, 2006, 05:38:00 PM »

Can someone point me in the direction of a tut on how to install this?
I couldn't find one in the X-S modchip install page.

Author Topic: Will This Work? (Read 105 times)