Print

[Chancer]

You don't have to flash with an evox bios to install the evox dash. You do however have to use the 1.6 version of either M8 or M8+ (so use M8+.16 or M8.16) or the 1.6 version of the newer X25035.
If you used a non 1.6 version then that would explain the FRAG. alternatively you may only have flashed a 256k bios and it needs to be 512K
You need to reflash bank 1 by booting bank 0 and usng the Eurasia disc. This has to be used in conjunction with a bios disc. The Eurasia disc must be burned as an image. make sure you don't burn the image as data. Use IMGBURN to burn it.

[Chancer]

The things you need to make sure are.
1. That you are using the latest version of the Eurasia Flash Disc. This should be an ISO .
2. make double sure this is burned as an ISO.
3. Use one of the original MS controllers (The big ones) to make the selections. Any third party (and some original S) controllers will not make any selections and the machine will just sit there.
4. The bios on the bios disc (2nd disc) must be named bios.bin and must be 512k in size.
5. Once you get the Eurasia disc recognised, when you get to the point where it asks you to insert the bios disc, flick the bank switch on the Duo to bank 1 using a non metalic object. The flash will go over the corrupt bank.

[onetwistedrose]

ok, flash successful, thanks, ill let u know how evox goes.

thanks

[onetwistedrose]

outstanding, thanks for the help.