Topic: Does This Mean It's Fragging? (Read 200 times)

Chombie · « **on:** July 08, 2006, 05:14:00 PM »

K here it is... I was lost as hell before but I think it might be a frag now.

Read the video description on YouTube for my problem.

Idk whats going on... let me know...

Heres the video.

Julius Pleaser · « **Reply #1 on:** July 08, 2006, 06:29:00 PM »

Your video makes no sense. I am 100% positive that no matter how you installed your mod chip, you can't make a KFC ad appear after the flubber screen. I think you changed the channel.

THe fact that is showed the flubber screen fine means it is booting ok. You need to show us what actually comes on the screen when the system frags....... Error Code 16??? I am guessing you probably lost some files and need to reinstall the dashboard and then you will be ok.

Chombie · « **Reply #2 on:** July 08, 2006, 06:43:00 PM »

no goofy... that was the same channel... first i booted with eject and showed that the ms dash comes on... then i turned it off and booted with power and the kfc ad was what happened to be on tv at the moment. meaning im not getting video when i boot with the power button

and why would i stage this problem? i want my chip to work.

grovespaz · « **Reply #3 on:** July 09, 2006, 06:55:00 AM »

This can happen, a friend of mine also has a tv which switches to cable if the av doesnt give a signal.

EDIT: Didn't read correctly, try to switch your banks (lil switch on your chip), do you have a 1.0-1.5 or a 1.6?

Do you have DuoX2?

Julius Pleaser · « **Reply #4 on:** July 09, 2006, 06:58:00 AM »

Now that you explained that the flubber was from the disabled boot and the frag was from the enabled boot. In the dark you can't see your hands so it looked like all one boot.

So then what you see is fragging. It means either your solder work is bad, or you flashed a bad bios to your chip. If you have yet to flash the chip at all then it is your soldering and I would go over it again. Mainly looking at the LPC as the D0 seems to be doing its job.

Chombie · « **Reply #5 on:** July 09, 2006, 01:21:00 PM »

guess I used a bad bios then... cuz my soldering is fine it booted fine before I flashed... so i guess I have to find a diff bios. ah well thanks!

and I have a 1.0 xbox with a DuoX2 GS white

grovespaz · « **Reply #6 on:** July 09, 2006, 03:35:00 PM »

Nice to hear that. So is it actually working, or do you have to reflash?

Could you please try switching banks? (lil switch on the chip)

Chombie · « **Reply #7 on:** July 16, 2006, 03:44:00 PM »

yeah i did that on both banks.. yes I know I'm stupid.

Ah well I just bought a new chip and replaced it. yay

Author Topic: Does This Mean It's Fragging? (Read 200 times)