Topic: Duox2 White, Need Help Installing (Read 60 times)

Chancer · « **on:** July 02, 2006, 09:36:00 AM »

BT should not be grounded on a DuoX 2.
Connect BT on the chip to pin 9 on the chip.
Connect Xbox D0 to a ground point.
If the Xbox still boots the error code and not the flashbios screen then the D0 is not correctly connected on the Xbox Mobo

Chancer · « **Reply #1 on:** July 02, 2006, 12:00:00 PM »

In order to fault find this you need to leave Xbox D0 to ground for now. Then also connect Chip BT to pin 9 on the chip itself (Point G on the duo diagrams) This makes the chip always on. If you then get FRAG this indiacates the LPC points are not soldered correctly and will need to be re-flowed

Chancer · « **Reply #2 on:** July 02, 2006, 12:40:00 PM »

All the white chips come with Cromwell and Flashbios.
By reflowed I mean you need to resolder the connections to the LPC, check the header is secure on the header pins as well.

NoFace · « **Reply #3 on:** July 03, 2006, 09:49:00 AM »

In order to resolder the LPC board, what do I need to do? I could just apply more solder to the points, or do have to get a desoldering braid?

Author Topic: Duox2 White, Need Help Installing (Read 60 times)